[Wed Dec 21 22:44:33 2011] Detection parameters:
  Position = (305.5, 234.4) = 5 34 34.38 21 54 56.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 974.9 +/- 44.3
  Background counts = 676.6
  Rate = 0.07 +/- 0.003

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 4.67'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 8.77"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.870
[Thu Dec 22 17:52:01 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 8.77"
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11.csv
[Fri Dec 23 21:48:54 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Dec 23 21:48:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11.csv
[Fri Dec 23 21:48:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Dec 23 21:48:56 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Dec 23 21:48:56 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 7132.200000, observed total counts = 7599.000000
[Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 116 = 3.156227 pixels
[Fri Dec 23 21:50:15 2011] 5927.630000 total counts/ 1628.900000 bgd. counts: snr = 106.510631
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 3.156227 pixels
  Position = (302.3, 234.7) = 5 34 35.37 21 54 54.6
  Extent = 17.5 (17.5-17.5)", rotation angle = 0
  Source counts = 4298.7 +/- 77.0
  Background counts = 1628.9
  Rate = 0.2 +/- 0.004
[Fri Dec 23 21:50:15 2011] Spatial fit model total counts = 8070.180000, observed total counts = 8068.000000
[Fri Dec 23 21:50:15 2011] Offset between fit and detection position for source 116 = 2.650467 pixels
[Fri Dec 23 21:50:15 2011] Warning, changing simple spatial fit ID from 11 to 65
[Fri Dec 23 21:50:15 2011] 8093.672000 total counts/ 7674.250000 bgd. counts: snr = 4.787770
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 2.650467 pixels
  Position = (304.6, 233.4) = 5 34 34.65 21 54 48.8
  Extent = 18.2 (18.1-36.4)", rotation angle = 0
  Source counts = 419.4 +/- 90.0
  Background counts = 7674.2
  Rate = 0.02 +/- 0.004
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 127
[Fri Dec 23 21:50:16 2011] Source is confused with source 115
[Fri Dec 23 21:50:16 2011] Source is confused with source 130
[Fri Dec 23 21:50:16 2011] Source is confused with source 123
[Sun Dec 25 02:57:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 18.22"
[Sun Dec 25 02:57:50 2011] source mask rpix=4.2, npix_max = 87, mask sum = 63, frac = 0.717
[Sun Dec 25 02:57:50 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 18.22"
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11.csv
[Mon Dec 26 10:48:09 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 26 10:48:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11.csv
[Mon Dec 26 10:48:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 26 10:48:12 2011] fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 26 10:48:12 2011] Fit fullrun_mos2_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 26 10:50:13 2011] Spatial fit model total counts = 28165.500000, observed total counts = 26407.000000
[Mon Dec 26 10:50:13 2011] Offset between fit and detection position for source 116 = 5.009906 pixels
[Mon Dec 26 10:50:13 2011] 23659.060000 total counts/ 19214.700000 bgd. counts: snr = 32.062134
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 5.009906 pixels
  Position = (300.0, 231.4) = 5 34 36.09 21 54 40.4
  Extent = 24.0 (24.0-24.1)", rotation angle = 0
  Source counts = 4444.4 +/- 153.8
  Background counts = 19214.7
  Rate = 0.2 +/- 0.008
[Mon Dec 26 10:50:14 2011] Spatial fit model total counts = 8058.710000, observed total counts = 8068.000000
[Mon Dec 26 10:50:14 2011] Offset between fit and detection position for source 116 = 1.920736 pixels
[Mon Dec 26 10:50:14 2011] Warning, changing simple spatial fit ID from 11 to 60
[Mon Dec 26 10:50:14 2011] 7245.520000 total counts/ 6396.340000 bgd. counts: snr = 10.617786
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 1.920736 pixels
  Position = (301.7, 232.3) = 5 34 35.56 21 54 44.4
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 849.2 +/- 85.1
  Background counts = 6396.3
  Rate = 0.04 +/- 0.004
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:25:58 2011] XMMSAS src. selection expression = ellipse(26198.306000, 20164.616000, 1093.170031, 1093.170031, 0.000000, X, Y)
[Tue Dec 27 03:25:58 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116_src.reg
[Tue Dec 27 03:25:58 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (239, 170) - (365, 295)
[Tue Dec 27 03:25:59 2011] XMMSAS bgd. selection expression = annulus(26198.306000, 20164.616000, 1821.950052, 3643.900105, X, Y) && !ellipse(26870.573883, 18975.152634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.046143, 18413.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.960000, 19294.006000, 644.092019, 644.092019, 0.000000, X, Y) && !ellipse(27216.371400, 19250.698000, 885.784025, 885.784025, 0.000000, X, Y) && !ellipse(26518.928200, 20135.732000, 1439.216041, 458.715213, 90.000000, X, Y) && !ellipse(28745.128113, 18770.744583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.945800, 20299.428240, 1229.272035, 1229.272035, 0.000000, X, Y) && !ellipse(29122.598000, 20147.960600, 1493.928043, 1493.928043, 0.000000, X, Y) && !ellipse(27638.550000, 20273.034000, 1247.472036, 1247.472036, 0.000000, X, Y) && !ellipse(23927.973053, 19911.053116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.132000, 19419.308000, 946.936027, 946.936027, 0.000000, X, Y) && !ellipse(28687.644000, 20151.524400, 2507.120072, 2507.120072, 0.000000, X, Y) && !ellipse(27115.755219, 18557.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.840607, 18971.423645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.581665, 20392.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25091.438000, 20046.721400, 1436.352041, 1436.352041, 0.000000, X, Y) && !ellipse(25894.356781, 19480.712692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.662000, 20546.942000, 1401.056040, 450.631213, 187.374000, X, Y) && !ellipse(28567.564600, 19600.942000, 1540.880044, 1540.880044, 0.000000, X, Y) && !ellipse(23728.906000, 20473.869120, 1423.624041, 1423.624041, 0.000000, X, Y) && !ellipse(29517.738983, 19354.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29540.821623, 20230.410588, 1493.928043, 717.637621, 0.000000, X, Y) && !ellipse(26793.455902, 16588.273331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26209.234000, 18402.786000, 889.192026, 889.192026, 0.000000, X, Y) && !ellipse(27096.341644, 17008.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.184000, 18249.460000, 1544.344044, 1544.344044, 0.000000, X, Y) && !ellipse(22707.970200, 20583.366220, 1305.472038, 1305.472038, 0.000000, X, Y) && !ellipse(27931.207642, 17798.443649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.921570, 19487.074142, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:25:59 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116.gif
[Tue Dec 27 03:47:56 2011] Mean detx,y = (586.06, -7475.53) 
[Tue Dec 27 03:48:01 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 03:48:59 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 03:49:00 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Tue Dec 27 03:49:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116_bgd.pi.gz
[Tue Dec 27 20:55:13 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:13 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Tue Dec 27 20:55:27 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:27 2011] Using photon index=1.80, rate=0.0417, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src116.arf
[Tue Dec 27 20:55:27 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:27 2011] Updating source flux to 6.5e-13
[Tue Dec 27 21:06:12 2011] Flag c found in src. 116 procflags, skipping spectral fitting