[Wed Dec 21 22:44:32 2011] Detection parameters:
  Position = (387.9, 279.9) = 5 34 8.61 21 58 10.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 485.9 +/- 36.5
  Background counts = 724.8
  Rate = 0.02 +/- 0.002

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 6.62'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 9.74"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.2, npix_max = 30, mask sum = 12, frac = 0.400
[Thu Dec 22 17:52:01 2011] Skipping simple spatial due to low active detector fraction
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:16 2011] Assessing source extent using major
[Fri Dec 23 21:50:16 2011] Source does appear to be extended
[Fri Dec 23 21:50:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 9.74"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.2, npix_max = 30, mask sum = 12, frac = 0.400
[Sun Dec 25 02:57:50 2011] Skipping simple spatial due to low active detector fraction
[Mon Dec 26 10:50:14 2011] Spatial fit model total counts = 6839.120000, observed total counts = 7343.000000
[Mon Dec 26 10:50:14 2011] Offset between fit and detection position for source 102 = 3.292775 pixels
[Mon Dec 26 10:50:14 2011] Warning, changing simple spatial fit ID from -1 to 68
[Mon Dec 26 10:50:14 2011] 6966.860000 total counts/ 1963.900000 bgd. counts: snr = 112.893086
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 3.292775 pixels
  Position = (390.7, 278.3) = 5 34 7.72 21 58 4.0
  Extent = 19.6 (19.1-19.8)", rotation angle = 0
  Source counts = 5003.0 +/- 83.5
  Background counts = 1963.9
  Rate = 0.2 +/- 0.004
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:50:14 2011] Source is confused with source 98
[Mon Dec 26 10:50:14 2011] Source is confused with source 104
[Mon Dec 26 10:50:14 2011] Source is confused with source 106
[Mon Dec 26 10:50:14 2011] Source is confused with source 103
[Tue Dec 27 03:26:10 2011] Counts = 5002.960000, rescaling region sizes by 2.000000
[Tue Dec 27 03:26:10 2011] XMMSAS src. selection expression = ellipse(33944.673800, 24160.286000, 2349.240068, 2349.240068, 0.000000, X, Y)
[Tue Dec 27 03:26:10 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102_src.reg
[Tue Dec 27 03:26:10 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (256, 143) - (526, 413)
[Tue Dec 27 03:26:10 2011] XMMSAS bgd. selection expression = annulus(33944.673800, 24160.286000, 7830.800225, 15661.600451, X, Y) && !ellipse(28060.988000, 34262.508000, 641.057618, 641.057618, 0.000000, X, Y) && !ellipse(26870.573883, 18975.152634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27950.323853, 37016.293091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27794.246000, 35049.256000, 761.394422, 297.811209, 90.253000, X, Y) && !ellipse(27808.046143, 18413.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26939.392000, 34409.247000, 2676.720077, 2676.720077, 0.000000, X, Y) && !ellipse(27976.276764, 36474.106903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.960000, 19294.006000, 644.092019, 644.092019, 0.000000, X, Y) && !ellipse(27287.627200, 36699.552000, 670.333619, 670.333619, 0.000000, X, Y) && !ellipse(31179.860000, 34196.614000, 1724.416050, 449.452813, 3.901000, X, Y) && !ellipse(27224.714000, 35040.103200, 492.736814, 492.736814, 0.000000, X, Y) && !ellipse(26198.306000, 20164.616000, 1457.560042, 1457.560042, 0.000000, X, Y) && !ellipse(27216.371400, 19250.698000, 885.784025, 885.784025, 0.000000, X, Y) && !ellipse(23885.978400, 34445.685800, 1110.024032, 1110.024032, 0.000000, X, Y) && !ellipse(20265.896454, 28756.178345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26518.928200, 20135.732000, 1439.216041, 458.715213, 90.000000, X, Y) && !ellipse(28055.790000, 39907.606000, 1545.080044, 286.207208, 270.650000, X, Y) && !ellipse(34364.306458, 31441.820129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35705.874176, 29369.243195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.282000, 34297.734400, 1626.184047, 1626.184047, 0.000000, X, Y) && !ellipse(28956.254000, 34540.376000, 1668.928048, 1668.928048, 0.000000, X, Y) && !ellipse(28745.128113, 18770.744583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20116.999756, 26059.396057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28534.191345, 34862.777588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.945800, 20299.428240, 1229.272035, 1229.272035, 0.000000, X, Y) && !ellipse(28098.908400, 37502.154000, 1416.032041, 708.189620, 90.000000, X, Y) && !ellipse(25897.304000, 34321.541400, 1338.480039, 1338.480039, 0.000000, X, Y) && !ellipse(33960.431366, 26138.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29122.598000, 20147.960600, 1493.928043, 1493.928043, 0.000000, X, Y) && !ellipse(26171.324000, 35080.806800, 478.411214, 478.411214, 0.000000, X, Y) && !ellipse(34331.745178, 30061.709351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27638.550000, 20273.034000, 1247.472036, 1247.472036, 0.000000, X, Y) && !ellipse(29565.056915, 34800.461395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.658112, 38927.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34329.135284, 29347.856934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20013.714000, 26479.592000, 1414.208041, 1414.208041, 0.000000, X, Y) && !ellipse(23927.973053, 19911.053116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.132000, 19419.308000, 946.936027, 946.936027, 0.000000, X, Y) && !ellipse(20350.344971, 29270.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28687.644000, 20151.524400, 2507.120072, 2507.120072, 0.000000, X, Y) && !ellipse(27115.755219, 18557.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34180.339478, 27229.443573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.424800, 35200.258000, 439.717613, 439.717613, 0.000000, X, Y) && !ellipse(34354.758972, 32146.815369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34257.188000, 25147.036000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(35035.692000, 30824.822000, 1729.760050, 346.068010, 358.363000, X, Y) && !ellipse(27402.848000, 37406.668000, 617.581618, 617.581618, 0.000000, X, Y) && !ellipse(35421.974000, 29894.304000, 1222.264035, 1222.264035, 0.000000, X, Y) && !ellipse(34433.978000, 25409.126000, 1633.272047, 1633.272047, 0.000000, X, Y) && !ellipse(24852.987200, 34372.190000, 1603.640046, 1603.640046, 0.000000, X, Y) && !ellipse(27616.886688, 40406.571686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27528.840607, 18971.423645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.581665, 20392.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25091.438000, 20046.721400, 1436.352041, 1436.352041, 0.000000, X, Y) && !ellipse(27552.865967, 37981.175873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20249.050800, 30622.687600, 1515.648044, 1515.648044, 0.000000, X, Y) && !ellipse(25894.356781, 19480.712692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.144043, 39188.550446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29144.919769, 36331.744232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.662000, 20546.942000, 1401.056040, 450.631213, 187.374000, X, Y) && !ellipse(27436.007000, 38441.867000, 2368.976068, 472.051214, 91.379000, X, Y) && !ellipse(33490.002655, 21953.500778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.564600, 19600.942000, 1540.880044, 1540.880044, 0.000000, X, Y) && !ellipse(31584.214661, 34679.681458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23728.906000, 20473.869120, 1423.624041, 1423.624041, 0.000000, X, Y) && !ellipse(33983.702698, 23710.130554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.738983, 19354.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31052.924713, 34685.052582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.860400, 26737.497000, 1032.496030, 1032.496030, 0.000000, X, Y) && !ellipse(20002.331200, 27509.498000, 1446.632042, 1446.632042, 0.000000, X, Y) && !ellipse(34990.848236, 31972.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29540.821623, 20230.410588, 1493.928043, 717.637621, 0.000000, X, Y) && !ellipse(35420.525200, 27214.815400, 1494.912043, 804.768023, 0.000000, X, Y) && !ellipse(33659.255463, 23100.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20295.504000, 31995.516000, 1219.352035, 1219.352035, 0.000000, X, Y) && !ellipse(35753.144318, 30755.351685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34240.746704, 30851.102661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20439.952209, 32353.034149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26793.455902, 16588.273331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20401.658722, 28137.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34300.301666, 23355.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33013.228424, 34082.079498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35010.790161, 25885.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34922.008200, 32413.492000, 1755.952051, 1755.952051, 0.000000, X, Y) && !ellipse(26209.234000, 18402.786000, 889.192026, 889.192026, 0.000000, X, Y) && !ellipse(26997.930328, 37574.090851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25709.569397, 35185.368958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.341644, 17008.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20352.997345, 25621.610931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.948000, 35038.343000, 738.255221, 738.255221, 0.000000, X, Y) && !ellipse(20526.996017, 30829.926147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35127.425598, 31188.312622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19582.656525, 31873.044678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.236298, 26313.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20487.639191, 29786.592560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.184000, 18249.460000, 1544.344044, 1544.344044, 0.000000, X, Y) && !ellipse(22707.970200, 20583.366220, 1305.472038, 1305.472038, 0.000000, X, Y) && !ellipse(31993.084400, 34134.452200, 1709.640049, 1709.640049, 0.000000, X, Y) && !ellipse(35186.059265, 25355.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26884.050812, 15262.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19062.687622, 28797.920715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34006.055389, 34005.901398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20212.491867, 25089.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35891.333282, 32123.820160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.207642, 17798.443649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.393066, 22316.513641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35274.739899, 32859.019012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20126.033493, 32880.686707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.921570, 19487.074142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.668518, 20142.144211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20136.727951, 24237.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35909.363586, 28061.792603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.880600, 28222.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31552.072876, 19875.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.002655, 14646.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.892303, 27714.310333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32390.424927, 20009.252029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35665.284088, 28818.847656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32578.791290, 19019.885895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19863.481628, 23547.433014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26585.973328, 13339.313980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.002014, 13879.672180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.803741, 13962.941864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.690002, 13951.298233, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:26:10 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102.gif
[Tue Dec 27 08:36:07 2011] Mean detx,y = (-7629.10, -2849.01) 
[Tue Dec 27 08:36:16 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 08:48:30 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 08:48:31 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Dec 27 08:48:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Tue Dec 27 20:55:20 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:20 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Dec 27 20:55:32 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:32 2011] Using photon index=1.80, rate=0.246, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src102.arf
[Tue Dec 27 20:55:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:32 2011] Updating source flux to 4e-12
[Tue Dec 27 21:06:12 2011] Flag c found in src. 102 procflags, skipping spectral fitting