[Wed Dec 21 22:44:27 2011] Detection parameters:
  Position = (309.4, 218.7) = 5 34 33.15 21 53 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3589.0 +/- 779.3
  Background counts = 576.2
  Rate = 0.2 +/- 0.04

[Wed Dec 21 22:44:34 2011] Off-axis axis estimate = 5.84'
[Thu Dec 22 17:52:01 2011] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Thu Dec 22 17:52:01 2011] Initial guess for spatial extent in simple fitting = 9.35"
[Thu Dec 22 17:52:01 2011] source mask rpix=2.1, npix_max = 28, mask sum = 8, frac = 0.285
[Thu Dec 22 17:52:01 2011] Skipping simple spatial due to low active detector fraction
[Fri Dec 23 21:50:15 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:50:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:50:15 2011] Assessing source extent using major
[Fri Dec 23 21:50:15 2011] Source does appear to be extended
[Fri Dec 23 21:50:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:50:16 2011] Source is confused with source 131
[Fri Dec 23 21:50:16 2011] Source is confused with source 139
[Fri Dec 23 21:50:16 2011] Source is confused with source 140
[Sun Dec 25 02:57:50 2011] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 02:57:50 2011] Initial guess for spatial extent in simple fitting = 9.35"
[Sun Dec 25 02:57:50 2011] source mask rpix=2.1, npix_max = 28, mask sum = 8, frac = 0.285
[Sun Dec 25 02:57:50 2011] Skipping simple spatial due to low active detector fraction
[Mon Dec 26 10:50:14 2011] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.035945 pixels away
[Mon Dec 26 10:50:14 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:50:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:50:14 2011] Assessing source extent using major
[Mon Dec 26 10:50:14 2011] Source does appear to be extended
[Mon Dec 26 10:50:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 03:25:57 2011] Counts = 3589.012207, rescaling region sizes by 2.000000
[Tue Dec 27 03:25:57 2011] XMMSAS src. selection expression = ellipse(26870.573883, 18975.152634, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Dec 27 03:25:57 2011] Writing source region out to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1_src.reg
[Tue Dec 27 03:25:57 2011] Extracting stamp from image fullrun_mos2_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (234, 144) - (384, 294)
[Tue Dec 27 03:25:58 2011] XMMSAS bgd. selection expression = annulus(26870.573883, 18975.152634, 4350.000000, 8700.000000, X, Y) && !ellipse(27808.046143, 18413.981659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27375.960000, 19294.006000, 644.092019, 644.092019, 0.000000, X, Y) && !ellipse(26198.306000, 20164.616000, 1457.560042, 1457.560042, 0.000000, X, Y) && !ellipse(27216.371400, 19250.698000, 885.784025, 885.784025, 0.000000, X, Y) && !ellipse(26518.928200, 20135.732000, 1439.216041, 458.715213, 90.000000, X, Y) && !ellipse(28745.128113, 18770.744583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20116.999756, 26059.396057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.945800, 20299.428240, 1229.272035, 1229.272035, 0.000000, X, Y) && !ellipse(33960.431366, 26138.385834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29122.598000, 20147.960600, 1493.928043, 1493.928043, 0.000000, X, Y) && !ellipse(27638.550000, 20273.034000, 1247.472036, 1247.472036, 0.000000, X, Y) && !ellipse(20013.714000, 26479.592000, 1414.208041, 1414.208041, 0.000000, X, Y) && !ellipse(23927.973053, 19911.053116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.132000, 19419.308000, 946.936027, 946.936027, 0.000000, X, Y) && !ellipse(28687.644000, 20151.524400, 2507.120072, 2507.120072, 0.000000, X, Y) && !ellipse(27115.755219, 18557.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34180.339478, 27229.443573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34257.188000, 25147.036000, 1634.928047, 1634.928047, 0.000000, X, Y) && !ellipse(34433.978000, 25409.126000, 1633.272047, 1633.272047, 0.000000, X, Y) && !ellipse(27528.840607, 18971.423645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24953.581665, 20392.613037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25091.438000, 20046.721400, 1436.352041, 1436.352041, 0.000000, X, Y) && !ellipse(25894.356781, 19480.712692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25437.662000, 20546.942000, 1401.056040, 450.631213, 187.374000, X, Y) && !ellipse(33490.002655, 21953.500778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28567.564600, 19600.942000, 1540.880044, 1540.880044, 0.000000, X, Y) && !ellipse(23728.906000, 20473.869120, 1423.624041, 1423.624041, 0.000000, X, Y) && !ellipse(33983.702698, 23710.130554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29517.738983, 19354.735535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20005.860400, 26737.497000, 1032.496030, 1032.496030, 0.000000, X, Y) && !ellipse(20002.331200, 27509.498000, 1446.632042, 1446.632042, 0.000000, X, Y) && !ellipse(29540.821623, 20230.410588, 1493.928043, 717.637621, 0.000000, X, Y) && !ellipse(33944.673800, 24160.286000, 1566.160045, 1566.160045, 0.000000, X, Y) && !ellipse(35420.525200, 27214.815400, 1494.912043, 804.768023, 0.000000, X, Y) && !ellipse(33659.255463, 23100.636719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26793.455902, 16588.273331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20401.658722, 28137.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34300.301666, 23355.986816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35010.790161, 25885.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26209.234000, 18402.786000, 889.192026, 889.192026, 0.000000, X, Y) && !ellipse(27096.341644, 17008.652084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20352.997345, 25621.610931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35404.236298, 26313.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27260.184000, 18249.460000, 1544.344044, 1544.344044, 0.000000, X, Y) && !ellipse(22707.970200, 20583.366220, 1305.472038, 1305.472038, 0.000000, X, Y) && !ellipse(35186.059265, 25355.417694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26884.050812, 15262.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20212.491867, 25089.718292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27931.207642, 17798.443649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.393066, 22316.513641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24403.921570, 19487.074142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30871.668518, 20142.144211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20136.727951, 24237.958344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35909.363586, 28061.792603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.880600, 28222.127167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31552.072876, 19875.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26617.002655, 14646.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19298.892303, 27714.310333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32390.424927, 20009.252029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32578.791290, 19019.885895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19863.481628, 23547.433014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26585.973328, 13339.313980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.002014, 13879.672180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26779.803741, 13962.941864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.690002, 13951.298233, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Dec 27 03:25:58 2011] Writing fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1.gif
[Tue Dec 27 03:28:26 2011] Mean detx,y = (-173.77, -8410.72) 
[Tue Dec 27 03:28:32 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Dec 27 03:32:28 2011] Binned source spectrum to 10 counts/bin
[Tue Dec 27 03:32:29 2011] Setting source spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 03:32:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Dec 27 11:05:12 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 11:05:12 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:55:11 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:55:12 2011] Error reading totcts from fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Dec 27 20:55:26 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:26 2011] Using photon index=1.80, rate=0.176, arf fullrun_mos2_xmm0412591601_pi300-10000_pass1_cl_src1.arf
[Tue Dec 27 20:55:26 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:26 2011] Getting flux using calc_pl_flux failed
[Tue Dec 27 21:06:12 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting