[Wed Dec 21 22:42:13 2011] Detection parameters:
  Position = (301.2, 402.6) = 5 34 35.71 22 7 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.7 +/- 35.2
  Background counts = 549.9
  Rate = 0.03 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.55'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.21"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.864
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 78 for pass 0, mean size = 10.21"
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78.csv
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78_1.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78.csv
[Thu Dec 22 17:51:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Thu Dec 22 17:52:01 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src78 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 10.655930 pixels away
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 17
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.21 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.21"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.864
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 74 for pass 1, mean size = 10.21"
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74.csv
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74_1.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74.csv
[Sun Dec 25 02:57:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sun Dec 25 02:57:49 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 10.671840 pixels away
[Mon Dec 26 10:49:20 2011] Warning: source 84 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 91 at 11.750631 pixels away
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:26 2011] XMMSAS src. selection expression = ellipse(26156.264801, 34977.891693, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:26 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91_src.reg
[Mon Dec 26 10:51:26 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (264, 365) - (339, 440)
[Mon Dec 26 10:51:26 2011] XMMSAS bgd. selection expression = annulus(26156.264801, 34977.891693, 1087.500000, 2175.000000, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(27224.537000, 34226.319400, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(26482.106000, 34276.411800, 1587.672046, 1587.672046, 0.000000, X, Y) && !ellipse(24243.196716, 34400.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.954346, 36306.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(26230.326843, 35441.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24838.597656, 35547.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.359070, 34923.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.431854, 34829.833984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.438000, 34434.984000, 1067.104031, 1067.104031, 0.000000, X, Y) && !ellipse(24565.203979, 34374.642487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(23595.341400, 34366.285400, 1618.976047, 1618.976047, 0.000000, X, Y) && !ellipse(25563.538000, 34638.524000, 727.080021, 727.080021, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23962.931824, 35083.468933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23411.928284, 34999.118652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.198000, 35156.220000, 2749.720079, 2749.720079, 0.000000, X, Y)
[Mon Dec 26 10:51:26 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91.gif
[Mon Dec 26 15:57:06 2011] Mean detx,y = (7624.94, -1567.46) 
[Mon Dec 26 15:57:08 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 15:57:43 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 15:57:44 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Mon Dec 26 15:57:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Mon Dec 26 23:56:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 23:56:46 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:53 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:53 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Tue Dec 27 20:55:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:06 2011] Using photon index=1.80, rate=0.0288, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src91.arf
[Tue Dec 27 20:55:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:06 2011] Updating source flux to 4.8e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting