[Wed Dec 21 22:42:13 2011] Detection parameters:
  Position = (388.1, 410.3) = 5 34 8.52 22 7 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.5 +/- 28.9
  Background counts = 242.7
  Rate = 0.01 +/- 0.001

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 10.39'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 11.62"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.7, npix_max = 40, mask sum = 27, frac = 0.671
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 11.62"
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73.csv
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73.csv
[Thu Dec 22 17:51:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Dec 22 17:52:01 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning, spatial fit 73 centroid is now closest to src. 90
[Fri Dec 23 21:49:44 2011] Source 85 is offset by -5.148946 and 3.089305 pixels which is larger than
2 X fitted extent = 1.276795 x 1.276795, not incorporating fit results
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 89
[Fri Dec 23 21:49:45 2011] Source is confused with source 101
[Fri Dec 23 21:49:45 2011] Source is confused with source 134
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 11.62 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 11.62"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.7, npix_max = 40, mask sum = 27, frac = 0.671
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 70 for pass 1, mean size = 11.62"
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70.csv
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70_1.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70.csv
[Sun Dec 25 02:57:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sun Dec 25 02:57:49 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 70 centroid is now closest to src. 136
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:25 2011] XMMSAS src. selection expression = ellipse(33713.189728, 35647.917542, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:25 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85_src.reg
[Mon Dec 26 10:51:25 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (351, 373) - (426, 448)
[Mon Dec 26 10:51:25 2011] XMMSAS bgd. selection expression = annulus(33713.189728, 35647.917542, 1087.500000, 2175.000000, X, Y) && !ellipse(30272.008000, 34089.698000, 1433.456041, 1433.456041, 0.000000, X, Y) && !ellipse(30678.190000, 34735.432400, 1720.880050, 674.797619, 91.600660, X, Y) && !ellipse(31803.760000, 34042.417260, 1714.208049, 1714.208049, 0.000000, X, Y) && !ellipse(33753.710000, 34880.694000, 596.402417, 596.402417, 0.000000, X, Y) && !ellipse(32955.782000, 34291.838000, 1820.880052, 1820.880052, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(31435.466644, 35164.959747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34285.704315, 36141.490143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.562000, 35772.788000, 906.448026, 906.448026, 0.000000, X, Y) && !ellipse(32572.355499, 35345.398193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31260.701996, 35343.133453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33489.729187, 35178.954407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(30197.302400, 34273.450000, 1686.144049, 1686.144049, 0.000000, X, Y) && !ellipse(34621.000000, 34660.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33159.460000, 34559.330000, 1820.616052, 1820.616052, 0.000000, X, Y) && !ellipse(33643.766022, 34238.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.499207, 34049.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34532.223785, 33519.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34439.420000, 33102.508360, 1804.512052, 1804.512052, 0.000000, X, Y) && !ellipse(35183.839661, 33015.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(33382.458038, 36221.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35165.835907, 36102.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.407593, 35718.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34657.734985, 35617.416565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35809.136230, 34988.055145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35912.653168, 34481.295013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35122.667786, 34229.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34477.955000, 33983.638000, 698.292020, 698.292020, 0.000000, X, Y) && !ellipse(35616.771393, 33634.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36089.966000, 33224.736600, 1161.152033, 1161.152033, 0.000000, X, Y)
[Mon Dec 26 10:51:25 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85.gif
[Mon Dec 26 15:51:05 2011] Mean detx,y = (8698.11, 5788.42) 
[Mon Dec 26 15:51:07 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 15:52:01 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 15:52:01 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Mon Dec 26 15:52:01 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Mon Dec 26 23:55:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 23:55:05 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:52 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:52 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Tue Dec 27 20:55:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:06 2011] Using photon index=1.80, rate=0.0137, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src85.arf
[Tue Dec 27 20:55:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:06 2011] Updating source flux to 2.8e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting