[Wed Dec 21 22:42:12 2011] Detection parameters:
  Position = (393.5, 217.0) = 5 34 6.88 21 53 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.8 +/- 24.9
  Background counts = 289.5
  Rate = 0.01 +/- 0.001

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 9.07'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.96"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.904
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 71 for pass 0, mean size = 10.96"
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71.csv
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71_1.ximg exists
[Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71.csv
[Thu Dec 22 17:51:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Thu Dec 22 17:52:00 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src71 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 13.248079 pixels away
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.96 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.96"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.904
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 68 for pass 1, mean size = 10.96"
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68.csv
[Sun Dec 25 02:57:43 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68_1.ximg exists
[Sun Dec 25 02:57:43 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68.csv
[Sun Dec 25 02:57:43 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Sun Dec 25 02:57:49 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 68 centroid is now closest to src. 123
[Mon Dec 26 10:49:20 2011] Source 83 is offset by -4.293687 and -0.222472 pixels which is larger than
2 X fitted extent = 1.219209 x 1.219209, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:25 2011] XMMSAS src. selection expression = ellipse(34182.519257, 18832.574905, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:25 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83_src.reg
[Mon Dec 26 10:51:25 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (356, 180) - (431, 255)
[Mon Dec 26 10:51:25 2011] XMMSAS bgd. selection expression = annulus(34182.519257, 18832.574905, 1087.500000, 2175.000000, X, Y) && !ellipse(33577.000000, 20129.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33733.646729, 19634.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34337.533142, 20676.819321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.594238, 21795.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34569.115417, 21092.461502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33720.854797, 18229.336319, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:25 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83.gif
[Mon Dec 26 15:49:04 2011] Mean detx,y = (-8039.37, 7202.55) 
[Mon Dec 26 15:49:07 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 15:49:34 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 15:49:35 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Mon Dec 26 15:49:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Mon Dec 26 23:45:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 23:45:43 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:52 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:52 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Tue Dec 27 20:55:06 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:06 2011] Using photon index=1.80, rate=0.0108, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src83.arf
[Tue Dec 27 20:55:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:06 2011] Updating source flux to 2.1e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting