[Wed Dec 21 22:42:11 2011] Detection parameters: Position = (402.9, 307.5) = 5 34 3.89 22 0 10.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 550.5 +/- 35.5 Background counts = 566.7 Rate = 0.05 +/- 0.003 [Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.61' [Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting [Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.23" [Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.738 [Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 10.23" [Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50.ximg exists [Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50.csv [Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50_1.ximg exists [Thu Dec 22 17:51:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50.csv [Thu Dec 22 17:51:57 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src50.ximg exists [Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists [Thu Dec 22 17:52:00 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly [Fri Dec 23 21:49:44 2011] Warning, spatial fit 50 centroid is now closest to src. 2 [Fri Dec 23 21:49:44 2011] Source 57 is offset by 1.900936 and -0.520115 pixels which is larger than 2 X fitted extent = 1.131007 x 1.131007, not incorporating fit results [Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000 [Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Dec 23 21:49:45 2011] Assessing source extent using major [Fri Dec 23 21:49:45 2011] Source does appear to be extended [Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Dec 23 21:49:45 2011] Source is confused with source 117 [Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting [Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.23" [Fri Dec 23 21:51:02 2011] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.738 [Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 10.23" [Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src49.ximg exists [Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src49_1.ximg exists [Sun Dec 25 02:57:42 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src49 appears to have run properly [Sun Dec 25 02:57:48 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src49.ximg exists [Sun Dec 25 02:57:48 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists [Sun Dec 25 02:57:48 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly [Mon Dec 26 10:49:20 2011] Source 57 is offset by -6.354328 and -1.775379 pixels which is larger than 2 X fitted extent = 1.162915 x 1.162915, not incorporating fit results [Mon Dec 26 10:49:20 2011] Warning, spatial fit 49 centroid is now closest to src. 14 [Mon Dec 26 10:49:20 2011] Source 57 is offset by 1.900936 and -0.520115 pixels which is larger than 2 X fitted extent = 1.131007 x 1.131007, not incorporating fit results [Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000 [Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Dec 26 10:49:20 2011] Assessing source extent using major [Mon Dec 26 10:49:20 2011] Source does appear to be extended [Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Dec 26 10:51:21 2011] XMMSAS src. selection expression = ellipse(35008.063446, 26706.432007, 652.500000, 652.500000, 0.000000, X, Y) [Mon Dec 26 10:51:21 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57_src.reg [Mon Dec 26 10:51:21 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (365, 270) - (440, 345) [Mon Dec 26 10:51:21 2011] XMMSAS bgd. selection expression = annulus(35008.063446, 26706.432007, 1087.500000, 2175.000000, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36273.994690, 25435.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.328003, 28052.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.796570, 26036.748657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.179840, 25160.057983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.990236, 25449.351587, 1692.000049, 1688.927292, 90.000000, X, Y) && !ellipse(34002.914490, 24126.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34016.797638, 24758.330811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35191.160000, 24032.893780, 1628.680047, 203.584806, 270.932800, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34331.542000, 25487.610000, 1636.408047, 1636.408047, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(35725.458000, 26302.570400, 915.232026, 915.232026, 0.000000, X, Y) && !ellipse(35651.844000, 24920.566000, 1661.088048, 1661.088048, 0.000000, X, Y) && !ellipse(34979.097076, 24925.133026, 870.000000, 870.000000, 0.000000, X, Y) [Mon Dec 26 10:51:21 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57.gif [Mon Dec 26 14:05:30 2011] Mean detx,y = (-195.77, 7600.53) [Mon Dec 26 14:05:35 2011] Setting backscal keywords in source and bgd. spectrum [Mon Dec 26 14:06:27 2011] Binned source spectrum to 10 counts/bin [Mon Dec 26 14:06:27 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57_src_b10.pi.gz [Mon Dec 26 14:06:27 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57_bgd.pi.gz [Mon Dec 26 22:17:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon Dec 26 22:17:54 2011] rmf not generated due to insufficient counts [Tue Dec 27 20:54:50 2011] Updating aperture counts using extracted products [Tue Dec 27 20:54:50 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57_src_b10.pi.gz [Tue Dec 27 20:55:04 2011] Calculating source flux in energy range 0.30-8.00 [Tue Dec 27 20:55:04 2011] Using photon index=1.80, rate=0.0467, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src57.arf [Tue Dec 27 20:55:04 2011] Assuming count rate is from the 0.30-10.00 bandpass [Tue Dec 27 20:55:04 2011] Updating source flux to 7.4e-13 [Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting