[Wed Dec 21 22:42:11 2011] Detection parameters:
  Position = (396.2, 341.0) = 5 34 5.98 22 2 36.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 678.0 +/- 49.5
  Background counts = 646.6
  Rate = 0.04 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.73'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 10.29"
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src49.ximg exists
[Thu Dec 22 17:51:57 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src49_1.ximg exists
[Thu Dec 22 17:51:57 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src49 appears to have run properly
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Thu Dec 22 17:52:00 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning, spatial fit 49 centroid is now closest to src. 10
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 20
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 48 for pass 1, mean size = 10.29"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48.ximg exists
[Sun Dec 25 02:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48.csv
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Dec 25 02:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48.csv
[Sun Dec 25 02:57:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Dec 25 02:57:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Dec 25 02:57:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sun Dec 25 02:57:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 48 centroid is now closest to src. 20
[Mon Dec 26 10:49:20 2011] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 13.637268 pixels away
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:21 2011] XMMSAS src. selection expression = ellipse(34423.609192, 29616.622894, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:21 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56_src.reg
[Mon Dec 26 10:51:21 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (359, 303) - (434, 378)
[Mon Dec 26 10:51:21 2011] XMMSAS bgd. selection expression = annulus(34423.609192, 29616.622894, 1087.500000, 2175.000000, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.734711, 29788.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35158.911591, 30826.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.328003, 28052.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(35314.161774, 32388.938110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(35008.063446, 26706.432007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(34439.420000, 33102.508360, 1804.512052, 1804.512052, 0.000000, X, Y) && !ellipse(34493.085999, 32565.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y)
[Mon Dec 26 10:51:21 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56.gif
[Mon Dec 26 14:04:10 2011] Mean detx,y = (2702.04, 6976.25) 
[Mon Dec 26 14:04:13 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 14:05:06 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 14:05:06 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Dec 26 14:05:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Dec 26 22:17:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 22:17:43 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:49 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:50 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Tue Dec 27 20:55:04 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:04 2011] Using photon index=1.80, rate=0.0445, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src56.arf
[Tue Dec 27 20:55:04 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:04 2011] Updating source flux to 6.7e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting