[Wed Dec 21 22:42:11 2011] Detection parameters:
  Position = (299.4, 395.0) = 5 34 36.28 22 6 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 532.0 +/- 32.8
  Background counts = 571.7
  Rate = 0.05 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.00'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.3, npix_max = 30, mask sum = 23, frac = 0.742
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 9.93"
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src41.ximg exists
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Dec 22 17:51:56 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src41 appears to have run properly
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Dec 22 17:52:00 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Dec 22 17:52:00 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Fri Dec 23 21:49:43 2011] Spatial fit model total counts = 6990.050000, observed total counts = 7237.000000
[Fri Dec 23 21:49:43 2011] Offset between fit and detection position for source 48 = 2.326030 pixels
[Fri Dec 23 21:49:43 2011] Warning, changing simple spatial fit ID from 41 to 10
[Fri Dec 23 21:49:43 2011] 7661.270000 total counts/ 3399.940000 bgd. counts: snr = 73.081851
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.326030 pixels
  Position = (297.1, 394.9) = 5 34 37.01 22 6 31.5
  Extent = 19.9 (19.9-39.7)", rotation angle = 0
  Source counts = 4261.3 +/- 87.5
  Background counts = 3399.9
  Rate = 0.2 +/- 0.004
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 17
[Fri Dec 23 21:51:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 19.87"
[Fri Dec 23 21:51:02 2011] source mask rpix=4.6, npix_max = 102, mask sum = 68, frac = 0.662
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 41 for pass 1, mean size = 19.87"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41.ximg exists
[Sun Dec 25 02:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41.csv
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41_1.ximg exists
[Sun Dec 25 02:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41.csv
[Sun Dec 25 02:57:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sun Dec 25 02:57:47 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Mon Dec 26 10:49:20 2011] Spatial fit model total counts = 6525.740000, observed total counts = 6514.000000
[Mon Dec 26 10:49:20 2011] Offset between fit and detection position for source 48 = 2.527886 pixels
[Mon Dec 26 10:49:20 2011] Warning, changing simple spatial fit ID from 41 to 40
[Mon Dec 26 10:49:20 2011] 6451.369000 total counts/ 6112.830000 bgd. counts: snr = 4.329997
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.527886 pixels
  Position = (295.0, 396.4) = 5 34 37.66 22 6 37.9
  Extent = 13.3 (7.6-20.3)", rotation angle = 0
  Source counts = 338.5 +/- 80.3
  Background counts = 6112.8
  Rate = 0.02 +/- 0.004
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:18 2011] XMMSAS src. selection expression = ellipse(25616.438000, 34434.984000, 800.328023, 800.328023, 0.000000, X, Y)
[Mon Dec 26 10:51:18 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48_src.reg
[Mon Dec 26 10:51:18 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (249, 350) - (341, 442)
[Mon Dec 26 10:51:18 2011] XMMSAS bgd. selection expression = annulus(25616.438000, 34434.984000, 1333.880038, 2667.760077, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(27224.537000, 34226.319400, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(26482.106000, 34276.411800, 1587.672046, 1587.672046, 0.000000, X, Y) && !ellipse(24243.196716, 34400.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.954346, 36306.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(26230.326843, 35441.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24838.597656, 35547.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.359070, 34923.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.431854, 34829.833984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.203979, 34374.642487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(26156.264801, 34977.891693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(22635.589752, 34744.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22123.614000, 34519.212000, 1656.464048, 870.344025, -0.000000, X, Y) && !ellipse(23595.341400, 34366.285400, 1618.976047, 1618.976047, 0.000000, X, Y) && !ellipse(25563.538000, 34638.524000, 727.080021, 727.080021, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23050.767303, 35509.914429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.931824, 35083.468933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23411.928284, 34999.118652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.198000, 35156.220000, 2749.720079, 2749.720079, 0.000000, X, Y)
[Mon Dec 26 10:51:18 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48.gif
[Mon Dec 26 13:19:20 2011] Mean detx,y = (7188.81, -2080.49) 
[Mon Dec 26 13:19:22 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 13:20:07 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 13:20:08 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Mon Dec 26 13:20:08 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue Dec 27 20:54:49 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:49 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue Dec 27 20:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:03 2011] Using photon index=1.80, rate=0.0166, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src48.arf
[Tue Dec 27 20:55:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:04 2011] Updating source flux to 2.8e-13
[Tue Dec 27 20:55:44 2011] Flag c found in src. 48 procflags, skipping spectral fitting