[Wed Dec 21 22:42:11 2011] Detection parameters:
  Position = (302.1, 407.9) = 5 34 35.45 22 7 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 515.0 +/- 45.4
  Background counts = 556.5
  Rate = 0.05 +/- 0.004

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.94'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.718
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 36 for pass 0, mean size = 10.40"
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36.csv
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36_1.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36.csv
[Thu Dec 22 17:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Fri Dec 23 21:49:44 2011] Source 43 is offset by 5.798814 and -2.928049 pixels which is larger than
2 X fitted extent = 5.045242 x 5.045242, not incorporating fit results
[Fri Dec 23 21:49:44 2011] Source 43 is offset by -1.093508 and 2.787077 pixels which is larger than
2 X fitted extent = 1.143623 x 1.143623, not incorporating fit results
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 91
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.718
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 36 for pass 1, mean size = 10.40"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src36.ximg exists
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src36_1.ximg exists
[Sun Dec 25 02:57:42 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src36 appears to have run properly
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sun Dec 25 02:57:47 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sun Dec 25 02:57:47 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Dec 26 10:49:20 2011] Source 43 is offset by -4.543600 and -4.464854 pixels which is larger than
2 X fitted extent = 2.300115 x 2.300115, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Source 43 is offset by 7.371895 and -5.380348 pixels which is larger than
2 X fitted extent = 2.289554 x 2.289554, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Source 43 is offset by 6.030378 and -1.510284 pixels which is larger than
2 X fitted extent = 5.479219 x 9.563311, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:17 2011] XMMSAS src. selection expression = ellipse(26230.326843, 35441.937714, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:17 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43_src.reg
[Mon Dec 26 10:51:17 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (265, 370) - (340, 445)
[Mon Dec 26 10:51:17 2011] XMMSAS bgd. selection expression = annulus(26230.326843, 35441.937714, 1087.500000, 2175.000000, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(27224.537000, 34226.319400, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(26482.106000, 34276.411800, 1587.672046, 1587.672046, 0.000000, X, Y) && !ellipse(24243.196716, 34400.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.437744, 38322.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.954346, 36306.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(24838.597656, 35547.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.359070, 34923.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25036.431854, 34829.833984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.438000, 34434.984000, 1067.104031, 1067.104031, 0.000000, X, Y) && !ellipse(24565.203979, 34374.642487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(26156.264801, 34977.891693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(23595.341400, 34366.285400, 1618.976047, 1618.976047, 0.000000, X, Y) && !ellipse(25563.538000, 34638.524000, 727.080021, 727.080021, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23962.931824, 35083.468933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23411.928284, 34999.118652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.198000, 35156.220000, 2749.720079, 2749.720079, 0.000000, X, Y)
[Mon Dec 26 10:51:17 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43.gif
[Mon Dec 26 13:13:49 2011] Mean detx,y = (8086.81, -1515.21) 
[Mon Dec 26 13:13:53 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 13:14:26 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 13:14:26 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Dec 26 13:14:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Dec 26 21:16:40 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 21:16:40 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:48 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:48 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Dec 27 20:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:03 2011] Using photon index=1.80, rate=0.0487, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src43.arf
[Tue Dec 27 20:55:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:03 2011] Updating source flux to 8.3e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting