[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (364.1, 392.1) = 5 34 16.02 22 6 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 731.5 +/- 44.4
  Background counts = 560.2
  Rate = 0.06 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 8.29'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.57 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.57"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.757
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 10.57"
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src26.ximg exists
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Dec 22 17:51:56 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src26 appears to have run properly
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning, spatial fit 26 centroid is now closest to src. 51
[Fri Dec 23 21:49:44 2011] Spatial fit model total counts = 7773.930000, observed total counts = 7772.000000
[Fri Dec 23 21:49:44 2011] Offset between fit and detection position for source 33 = 4.924972 pixels
[Fri Dec 23 21:49:44 2011] Warning, changing simple spatial fit ID from 26 to 79
[Fri Dec 23 21:49:44 2011] 7684.760000 total counts/ 5955.530000 bgd. counts: snr = 22.407456
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.924972 pixels
  Position = (364.4, 397.0) = 5 34 15.95 22 6 40.6
  Extent = 21.9 (20.8-43.8)", rotation angle = 0
  Source counts = 1729.2 +/- 87.7
  Background counts = 5955.5
  Rate = 0.08 +/- 0.004
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 31
[Fri Dec 23 21:49:45 2011] Source is confused with source 50
[Fri Dec 23 21:49:45 2011] Source is confused with source 51
[Fri Dec 23 21:49:45 2011] Source is confused with source 69
[Fri Dec 23 21:49:45 2011] Source is confused with source 84
[Fri Dec 23 21:49:45 2011] Source is confused with source 86
[Fri Dec 23 21:49:45 2011] Source is confused with source 87
[Fri Dec 23 21:49:45 2011] Source is confused with source 92
[Fri Dec 23 21:51:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 21.88"
[Fri Dec 23 21:51:02 2011] source mask rpix=5.0, npix_max = 122, mask sum = 124, frac = 1.014
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 21.88"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src26.ximg exists
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Dec 25 02:57:42 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src26 appears to have run properly
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Dec 25 02:57:46 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 26 centroid is now closest to src. 51
[Mon Dec 26 10:49:20 2011] Spatial fit model total counts = 6807.980000, observed total counts = 7156.000000
[Mon Dec 26 10:49:20 2011] Offset between fit and detection position for source 33 = 5.451794 pixels
[Mon Dec 26 10:49:20 2011] Warning, changing simple spatial fit ID from 26 to 44
[Mon Dec 26 10:49:20 2011] 6589.173000 total counts/ 352.253000 bgd. counts: snr = 332.309551
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 5.451794 pixels
  Position = (366.1, 391.8) = 5 34 15.40 22 6 18.2
  Extent = 21.4 (21.4-21.4)", rotation angle = 0
  Source counts = 6236.9 +/- 81.2
  Background counts = 352.3
  Rate = 0.3 +/- 0.004
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:15 2011] Counts = 6236.920000, rescaling region sizes by 2.000000
[Mon Dec 26 10:51:15 2011] XMMSAS src. selection expression = ellipse(31803.760000, 34042.417260, 2571.312074, 2571.312074, 0.000000, X, Y)
[Mon Dec 26 10:51:15 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33_src.reg
[Mon Dec 26 10:51:15 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (218, 244) - (514, 540)
[Mon Dec 26 10:51:15 2011] XMMSAS bgd. selection expression = annulus(31803.760000, 34042.417260, 8571.040247, 17142.080493, X, Y) && !ellipse(20610.184723, 28846.566162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20631.294861, 27110.851379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36273.994690, 25435.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20520.065063, 25176.548370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.734711, 29788.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20507.894409, 26142.949829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35158.911591, 30826.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27224.537000, 34226.319400, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(27977.800751, 40579.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.106000, 34276.411800, 1587.672046, 1587.672046, 0.000000, X, Y) && !ellipse(30272.008000, 34089.698000, 1433.456041, 1433.456041, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.328003, 28052.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.796570, 26036.748657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.179840, 25160.057983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.990236, 25449.351587, 1692.000049, 1688.927292, 90.000000, X, Y) && !ellipse(34002.914490, 24126.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.413400, 41154.160000, 2061.120059, 1308.040038, 90.000000, X, Y) && !ellipse(27679.341400, 39943.667000, 1086.000031, 1086.000031, 0.000000, X, Y) && !ellipse(28140.482361, 39793.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27949.332400, 39552.754000, 1900.472055, 1900.472055, 0.000000, X, Y) && !ellipse(30678.190000, 34735.432400, 1720.880050, 674.797619, 91.600660, X, Y) && !ellipse(24243.196716, 34400.767975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34016.797638, 24758.330811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35191.160000, 24032.893780, 1628.680047, 203.584806, 270.932800, X, Y) && !ellipse(33925.254883, 22572.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27987.175659, 41794.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.437744, 38322.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.954346, 36306.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(26230.326843, 35441.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24838.597656, 35547.422028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.359070, 34923.920258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33753.710000, 34880.694000, 596.402417, 596.402417, 0.000000, X, Y) && !ellipse(25036.431854, 34829.833984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25616.438000, 34434.984000, 1067.104031, 1067.104031, 0.000000, X, Y) && !ellipse(24565.203979, 34374.642487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32955.782000, 34291.838000, 1820.880052, 1820.880052, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(35314.161774, 32388.938110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35008.063446, 26706.432007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34331.542000, 25487.610000, 1636.408047, 1636.408047, 0.000000, X, Y) && !ellipse(20352.751755, 25714.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20261.515656, 23617.987762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34166.562531, 23526.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34774.880188, 23200.088806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27858.372600, 42447.689200, 1642.824047, 1642.824047, 0.000000, X, Y) && !ellipse(28430.871072, 41768.465084, 1646.320047, 1330.518657, 89.393040, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(31435.466644, 35164.959747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(20591.076477, 31535.622314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 20129.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20335.160858, 24477.680939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.104614, 22316.850830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27871.338000, 43756.016000, 1439.704041, 1439.704041, 0.000000, X, Y) && !ellipse(27530.797363, 43275.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28899.491516, 41356.020782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(34285.704315, 36141.490143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34182.519257, 18832.574905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.562000, 35772.788000, 906.448026, 906.448026, 0.000000, X, Y) && !ellipse(33713.189728, 35647.917542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32572.355499, 35345.398193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31260.701996, 35343.133453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20879.548065, 35227.445862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33489.729187, 35178.954407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.264801, 34977.891693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(30197.302400, 34273.450000, 1686.144049, 1686.144049, 0.000000, X, Y) && !ellipse(21147.934000, 34564.057800, 1672.488048, 1672.488048, 0.000000, X, Y) && !ellipse(22635.589752, 34744.331421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22123.614000, 34519.212000, 1656.464048, 870.344025, -0.000000, X, Y) && !ellipse(34621.000000, 34660.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23595.341400, 34366.285400, 1618.976047, 1618.976047, 0.000000, X, Y) && !ellipse(33159.460000, 34559.330000, 1820.616052, 1820.616052, 0.000000, X, Y) && !ellipse(33733.646729, 19634.700409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25563.538000, 34638.524000, 727.080021, 727.080021, 0.000000, X, Y) && !ellipse(33643.766022, 34238.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.499207, 34049.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34532.223785, 33519.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34439.420000, 33102.508360, 1804.512052, 1804.512052, 0.000000, X, Y) && !ellipse(35183.839661, 33015.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34493.085999, 32565.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(20272.027000, 31111.036000, 1515.560044, 1012.280029, 105.537600, X, Y) && !ellipse(20240.094000, 30654.480000, 1515.560044, 1006.544029, 93.154440, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(20438.868958, 29627.654541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19994.633438, 28215.455078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35725.458000, 26302.570400, 915.232026, 915.232026, 0.000000, X, Y) && !ellipse(35651.844000, 24920.566000, 1661.088048, 1661.088048, 0.000000, X, Y) && !ellipse(34979.097076, 24925.133026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35574.658000, 22858.000000, 986.088028, 986.088028, 0.000000, X, Y) && !ellipse(34337.533142, 20676.819321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.594238, 21795.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34569.115417, 21092.461502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28336.041199, 43277.932770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33720.854797, 18229.336319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28800.997894, 39900.698334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33382.458038, 36221.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35165.835907, 36102.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.407593, 35718.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.767303, 35509.914429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34657.734985, 35617.416565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23962.931824, 35083.468933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35809.136230, 34988.055145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23411.928284, 34999.118652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.198000, 35156.220000, 2749.720079, 2749.720079, 0.000000, X, Y) && !ellipse(21753.810715, 34917.258789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35912.653168, 34481.295013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35122.667786, 34229.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34477.955000, 33983.638000, 698.292020, 698.292020, 0.000000, X, Y) && !ellipse(35616.771393, 33634.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36089.966000, 33224.736600, 1161.152033, 1161.152033, 0.000000, X, Y) && !ellipse(20028.909866, 32337.711975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19460.368530, 30072.369293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19394.967194, 25150.866272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19538.657379, 24317.898621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35097.397217, 23344.769318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35570.632294, 23176.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17210.661316, 21477.528366, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:15 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33.gif
[Mon Dec 26 12:40:04 2011] Mean detx,y = (7758.88, 3820.67) 
[Mon Dec 26 12:40:10 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:51:37 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:51:38 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Dec 26 12:51:38 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Dec 27 20:54:47 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:47 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Tue Dec 27 20:55:03 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:03 2011] Using photon index=1.80, rate=0.306, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src33.arf
[Tue Dec 27 20:55:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:03 2011] Updating source flux to 4.7e-12
[Tue Dec 27 20:55:44 2011] Flag c found in src. 33 procflags, skipping spectral fitting