[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (356.0, 398.0) = 5 34 18.57 22 6 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 626.2 +/- 39.8
  Background counts = 641.8
  Rate = 0.05 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 8.33'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.60"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.754
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 10.60"
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24.csv
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24.csv
[Thu Dec 22 17:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning, spatial fit 24 centroid is now closest to src. 18
[Fri Dec 23 21:49:44 2011] Spatial fit model total counts = 7963.120000, observed total counts = 7946.000000
[Fri Dec 23 21:49:44 2011] Offset between fit and detection position for source 31 = 3.344419 pixels
[Fri Dec 23 21:49:44 2011] Warning, changing simple spatial fit ID from 24 to 86
[Fri Dec 23 21:49:44 2011] 7451.776000 total counts/ 6635.910000 bgd. counts: snr = 10.015407
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.344419 pixels
  Position = (353.2, 399.8) = 5 34 19.44 22 6 52.8
  Extent = 21.5 (21.4-43.0)" x 8.4 (6.7-11.5)", rotation angle = 92 (84-101) degrees
  Source counts = 815.9 +/- 86.3
  Background counts = 6635.9
  Rate = 0.04 +/- 0.004
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major axis lower bound
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.86
[Fri Dec 23 21:49:45 2011] Source is asymmetric
[Fri Dec 23 21:49:45 2011] Source is confused with source 18
[Fri Dec 23 21:51:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 14.97"
[Fri Dec 23 21:51:02 2011] source mask rpix=3.4, npix_max = 62, mask sum = 60, frac = 0.965
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 24 for pass 1, mean size = 14.97"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src24.ximg exists
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun Dec 25 02:57:42 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src24 appears to have run properly
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun Dec 25 02:57:46 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 24 centroid is now closest to src. 41
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.86
[Mon Dec 26 10:49:20 2011] Source is asymmetric
[Mon Dec 26 10:51:15 2011] XMMSAS src. selection expression = ellipse(30678.190000, 34735.432400, 1290.660037, 506.098215, 91.600660, X, Y)
[Mon Dec 26 10:51:15 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31_src.reg
[Mon Dec 26 10:51:15 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (279, 326) - (427, 474)
[Mon Dec 26 10:51:15 2011] XMMSAS bgd. selection expression = annulus(30678.190000, 34735.432400, 2151.100062, 4302.200124, X, Y) && !ellipse(35158.911591, 30826.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(27224.537000, 34226.319400, 1593.528046, 1593.528046, 0.000000, X, Y) && !ellipse(26482.106000, 34276.411800, 1587.672046, 1587.672046, 0.000000, X, Y) && !ellipse(30272.008000, 34089.698000, 1433.456041, 1433.456041, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(27679.341400, 39943.667000, 1086.000031, 1086.000031, 0.000000, X, Y) && !ellipse(28140.482361, 39793.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27949.332400, 39552.754000, 1900.472055, 1900.472055, 0.000000, X, Y) && !ellipse(31803.760000, 34042.417260, 1714.208049, 1714.208049, 0.000000, X, Y) && !ellipse(27902.437744, 38322.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27724.954346, 36306.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(26230.326843, 35441.937714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33753.710000, 34880.694000, 596.402417, 596.402417, 0.000000, X, Y) && !ellipse(25616.438000, 34434.984000, 1067.104031, 1067.104031, 0.000000, X, Y) && !ellipse(32955.782000, 34291.838000, 1820.880052, 1820.880052, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(35314.161774, 32388.938110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(31435.466644, 35164.959747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(34285.704315, 36141.490143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.562000, 35772.788000, 906.448026, 906.448026, 0.000000, X, Y) && !ellipse(33713.189728, 35647.917542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32572.355499, 35345.398193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31260.701996, 35343.133453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33489.729187, 35178.954407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26156.264801, 34977.891693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(30197.302400, 34273.450000, 1686.144049, 1686.144049, 0.000000, X, Y) && !ellipse(34621.000000, 34660.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33159.460000, 34559.330000, 1820.616052, 1820.616052, 0.000000, X, Y) && !ellipse(33643.766022, 34238.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.499207, 34049.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34532.223785, 33519.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34439.420000, 33102.508360, 1804.512052, 1804.512052, 0.000000, X, Y) && !ellipse(35183.839661, 33015.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34493.085999, 32565.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28800.997894, 39900.698334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33382.458038, 36221.695923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35165.835907, 36102.960358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.407593, 35718.267853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34657.734985, 35617.416565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35809.136230, 34988.055145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35122.667786, 34229.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34477.955000, 33983.638000, 698.292020, 698.292020, 0.000000, X, Y) && !ellipse(35616.771393, 33634.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36089.966000, 33224.736600, 1161.152033, 1161.152033, 0.000000, X, Y)
[Mon Dec 26 10:51:15 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31.gif
[Mon Dec 26 12:36:58 2011] Mean detx,y = (7614.45, 2905.69) 
[Mon Dec 26 12:37:02 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:37:47 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:37:48 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon Dec 26 12:37:48 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Tue Dec 27 20:54:47 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:47 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Tue Dec 27 20:55:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:02 2011] Using photon index=1.80, rate=0.0401, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src31.arf
[Tue Dec 27 20:55:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:02 2011] Updating source flux to 7.1e-13
[Tue Dec 27 20:55:44 2011] Flag c found in src. 31 procflags, skipping spectral fitting