[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (324.0, 458.0) = 5 34 28.57 22 11 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 480.6 +/- 38.2
  Background counts = 261.4
  Rate = 0.02 +/- 0.002

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 11.71'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 12.29"
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22.csv
[Thu Dec 22 17:51:56 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Dec 22 17:51:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22.csv
[Thu Dec 22 17:51:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Dec 23 21:49:44 2011] Warning, spatial fit 22 centroid is now closest to src. 79
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 28
[Fri Dec 23 21:49:45 2011] Source is confused with source 30
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 12.29"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.814
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 12.29"
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src22.ximg exists
[Sun Dec 25 02:57:42 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Dec 25 02:57:42 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src22 appears to have run properly
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Dec 25 02:57:46 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 22 centroid is now closest to src. 30
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:14 2011] XMMSAS src. selection expression = ellipse(28140.482361, 39793.952881, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:14 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29_src.reg
[Mon Dec 26 10:51:14 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (287, 420) - (362, 495)
[Mon Dec 26 10:51:14 2011] XMMSAS bgd. selection expression = annulus(28140.482361, 39793.952881, 1087.500000, 2175.000000, X, Y) && !ellipse(27977.800751, 40579.647736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.413400, 41154.160000, 2061.120059, 1308.040038, 90.000000, X, Y) && !ellipse(27679.341400, 39943.667000, 1086.000031, 1086.000031, 0.000000, X, Y) && !ellipse(27949.332400, 39552.754000, 1900.472055, 1900.472055, 0.000000, X, Y) && !ellipse(27987.175659, 41794.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.437744, 38322.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(28929.047302, 36522.959442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27858.372600, 42447.689200, 1642.824047, 1642.824047, 0.000000, X, Y) && !ellipse(28430.871072, 41768.465084, 1646.320047, 1330.518657, 89.393040, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(28899.491516, 41356.020782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(28800.997894, 39900.698334, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:14 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29.gif
[Mon Dec 26 12:24:03 2011] Mean detx,y = (12549.46, 109.68) 
[Mon Dec 26 12:24:07 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:24:54 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:24:54 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Dec 26 12:24:54 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Dec 26 20:32:17 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 20:32:17 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:47 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:47 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Dec 27 20:55:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:02 2011] Using photon index=1.80, rate=0.0236, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src29.arf
[Tue Dec 27 20:55:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:02 2011] Updating source flux to 5.5e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting