[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (392.6, 292.9) = 5 34 7.12 21 59 12.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 843.1 +/- 49.3
  Background counts = 542.5
  Rate = 0.06 +/- 0.004

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 6.84'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 9.85"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.3, npix_max = 30, mask sum = 28, frac = 0.916
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 9.85"
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src18.ximg exists
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Dec 22 17:51:55 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src18 appears to have run properly
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Dec 23 21:49:43 2011] Spatial fit model total counts = 8010.740000, observed total counts = 8012.000000
[Fri Dec 23 21:49:43 2011] Offset between fit and detection position for source 25 = 0.775721 pixels
[Fri Dec 23 21:49:43 2011] Warning, changing simple spatial fit ID from 18 to 17
[Fri Dec 23 21:49:43 2011] 7527.700000 total counts/ 7092.750000 bgd. counts: snr = 5.164544
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.775721 pixels
  Position = (391.9, 293.1) = 5 34 7.36 21 59 8.4
  Extent = 21.1" x 21.1", rotation angle = 90
  Source counts = 434.9 +/- 86.8
  Background counts = 7092.8
  Rate = 0.02 +/- 0.004
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 14
[Fri Dec 23 21:51:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 21.13"
[Fri Dec 23 21:51:02 2011] source mask rpix=4.9, npix_max = 114, mask sum = 67, frac = 0.584
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 21.13"
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18.csv
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Dec 25 02:57:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18.csv
[Sun Dec 25 02:57:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Dec 25 02:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Dec 25 02:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18.csv
[Sun Dec 25 02:57:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 18 centroid is now closest to src. 14
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:14 2011] XMMSAS src. selection expression = ellipse(34044.990236, 25449.351587, 1269.000037, 1266.695469, 90.000000, X, Y)
[Mon Dec 26 10:51:14 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25_src.reg
[Mon Dec 26 10:51:14 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (319, 220) - (465, 366)
[Mon Dec 26 10:51:14 2011] XMMSAS bgd. selection expression = annulus(34044.990236, 25449.351587, 2115.000061, 4230.000122, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36273.994690, 25435.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.734711, 29788.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.328003, 28052.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.796570, 26036.748657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.179840, 25160.057983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34002.914490, 24126.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34016.797638, 24758.330811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35191.160000, 24032.893780, 1628.680047, 203.584806, 270.932800, X, Y) && !ellipse(33925.254883, 22572.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35008.063446, 26706.432007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34331.542000, 25487.610000, 1636.408047, 1636.408047, 0.000000, X, Y) && !ellipse(34166.562531, 23526.195435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34774.880188, 23200.088806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.104614, 22316.850830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(35725.458000, 26302.570400, 915.232026, 915.232026, 0.000000, X, Y) && !ellipse(35651.844000, 24920.566000, 1661.088048, 1661.088048, 0.000000, X, Y) && !ellipse(34979.097076, 24925.133026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35574.658000, 22858.000000, 986.088028, 986.088028, 0.000000, X, Y) && !ellipse(34337.533142, 20676.819321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.594238, 21795.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34569.115417, 21092.461502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35097.397217, 23344.769318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35570.632294, 23176.785614, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:14 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25.gif
[Mon Dec 26 12:17:21 2011] Mean detx,y = (-1422.20, 7129.39) 
[Mon Dec 26 12:17:25 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:18:55 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:18:56 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Dec 26 12:18:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Dec 27 20:54:46 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:46 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Dec 27 20:55:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:02 2011] Using photon index=1.80, rate=0.0214, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src25.arf
[Tue Dec 27 20:55:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:02 2011] Updating source flux to 3.2e-13
[Tue Dec 27 20:55:44 2011] Flag c found in src. 25 procflags, skipping spectral fitting