[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (391.9, 323.0) = 5 34 7.33 22 1 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 811.8 +/- 44.4
  Background counts = 672.5
  Rate = 0.06 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.01'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.581
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 9.93"
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15.ximg exists
[Thu Dec 22 17:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15.csv
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Dec 22 17:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15.csv
[Thu Dec 22 17:51:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Dec 22 17:51:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Dec 22 17:51:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Dec 22 17:51:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:49:43 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 10.786654 pixels away
[Fri Dec 23 21:49:43 2011] Warning, spatial fit 15 centroid is now closest to src. 20
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 13
[Fri Dec 23 21:49:45 2011] Source is confused with source 21
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 9.93 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.581
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 9.93"
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15.csv
[Sun Dec 25 02:57:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Dec 25 02:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Dec 25 02:57:46 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Dec 25 02:57:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15.csv
[Sun Dec 25 02:57:46 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:49:20 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 12.189045 pixels away
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:13 2011] XMMSAS src. selection expression = ellipse(34050.328003, 28052.855774, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:13 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22_src.reg
[Mon Dec 26 10:51:13 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (354, 286) - (429, 361)
[Mon Dec 26 10:51:13 2011] XMMSAS bgd. selection expression = annulus(34050.328003, 28052.855774, 1087.500000, 2175.000000, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36273.994690, 25435.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.734711, 29788.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35158.911591, 30826.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34113.760000, 29371.172000, 1960.392056, 1960.392056, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.796570, 26036.748657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.179840, 25160.057983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.990236, 25449.351587, 1692.000049, 1688.927292, 90.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35008.063446, 26706.432007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34331.542000, 25487.610000, 1636.408047, 1636.408047, 0.000000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(35725.458000, 26302.570400, 915.232026, 915.232026, 0.000000, X, Y) && !ellipse(35651.844000, 24920.566000, 1661.088048, 1661.088048, 0.000000, X, Y)
[Mon Dec 26 10:51:13 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22.gif
[Mon Dec 26 12:13:21 2011] Mean detx,y = (1134.62, 6829.81) 
[Mon Dec 26 12:13:25 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:14:19 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:14:20 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Dec 26 12:14:20 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Dec 26 20:07:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 20:07:36 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:46 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:46 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Dec 27 20:55:02 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:02 2011] Using photon index=1.80, rate=0.0591, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src22.arf
[Tue Dec 27 20:55:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:02 2011] Updating source flux to 1e-12
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting