[Wed Dec 21 22:42:10 2011] Detection parameters:
  Position = (393.4, 335.0) = 5 34 6.88 22 2 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 880.2 +/- 47.2
  Background counts = 659.2
  Rate = 0.06 +/- 0.003

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 7.37'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.720
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 10.12"
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src13.ximg exists
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu Dec 22 17:51:55 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src13 appears to have run properly
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu Dec 22 17:51:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu Dec 22 17:51:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu Dec 22 17:51:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:49:43 2011] Warning, spatial fit 13 centroid is now closest to src. 114
[Fri Dec 23 21:49:43 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.650178 pixels away
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 21
[Fri Dec 23 21:49:45 2011] Source is confused with source 56
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.12"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.720
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 10.12"
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13.csv
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13.csv
[Sun Dec 25 02:57:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:45 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun Dec 25 02:57:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Dec 25 02:57:45 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Dec 25 02:57:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13.csv
[Sun Dec 25 02:57:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 13 centroid is now closest to src. 114
[Mon Dec 26 10:49:20 2011] Spatial fit model total counts = 9329.590000, observed total counts = 11169.000000
[Mon Dec 26 10:49:20 2011] Poor agreement between spatial fit and data for source 20
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Dec 26 10:49:20 2011] Spatial fit model total counts = 14189.000000, observed total counts = 14185.000000
[Mon Dec 26 10:49:20 2011] Offset between fit and detection position for source 20 = 3.244219 pixels
[Mon Dec 26 10:49:20 2011] Warning, changing simple spatial fit ID from 13 to 94
[Mon Dec 26 10:49:20 2011] 13901.934000 total counts/ 12935.500000 bgd. counts: snr = 8.497293
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 3.244219 pixels
  Position = (392.7, 338.2) = 5 34 7.10 22 2 24.5
  Extent = 24.5 (20.3-28.9)", rotation angle = 0
  Source counts = 966.4 +/- 117.9
  Background counts = 12935.5
  Rate = 0.05 +/- 0.006
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major axis lower bound
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:13 2011] XMMSAS src. selection expression = ellipse(34113.760000, 29371.172000, 1470.294042, 1470.294042, 0.000000, X, Y)
[Mon Dec 26 10:51:13 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20_src.reg
[Mon Dec 26 10:51:13 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (308, 254) - (477, 423)
[Mon Dec 26 10:51:13 2011] XMMSAS bgd. selection expression = annulus(34113.760000, 29371.172000, 2450.490071, 4900.980141, X, Y) && !ellipse(34973.869324, 27482.977631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36273.994690, 25435.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36175.734711, 29788.804199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35143.002655, 29008.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35158.911591, 30826.243622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28247.880000, 34204.240600, 1600.880046, 1600.880046, 0.000000, X, Y) && !ellipse(34420.484000, 27750.668000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(34100.088562, 26667.124298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.008000, 34089.698000, 1433.456041, 1433.456041, 0.000000, X, Y) && !ellipse(36050.250400, 30759.352000, 1759.704051, 1759.704051, 0.000000, X, Y) && !ellipse(34153.146667, 28659.155609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.328003, 28052.855774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34767.796570, 26036.748657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34856.179840, 25160.057983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34044.990236, 25449.351587, 1692.000049, 1688.927292, 90.000000, X, Y) && !ellipse(34002.914490, 24126.824127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30678.190000, 34735.432400, 1720.880050, 674.797619, 91.600660, X, Y) && !ellipse(31803.760000, 34042.417260, 1714.208049, 1714.208049, 0.000000, X, Y) && !ellipse(34016.797638, 24758.330811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35191.160000, 24032.893780, 1628.680047, 203.584806, 270.932800, X, Y) && !ellipse(27775.242200, 35898.350000, 1731.712050, 1731.712050, 0.000000, X, Y) && !ellipse(32955.782000, 34291.838000, 1820.880052, 1820.880052, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(35314.161774, 32388.938110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34522.816000, 30930.848000, 1413.464041, 1413.464041, 0.000000, X, Y) && !ellipse(34588.386000, 30301.380000, 1252.456036, 1252.456036, 0.000000, X, Y) && !ellipse(34423.609192, 29616.622894, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35008.063446, 26706.432007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35782.940000, 26341.760000, 1173.232034, 1173.232034, 0.000000, X, Y) && !ellipse(34331.542000, 25487.610000, 1636.408047, 1636.408047, 0.000000, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(34421.587800, 30631.753000, 2748.160079, 1109.440032, 93.803370, X, Y) && !ellipse(35237.946503, 28457.211426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(30197.302400, 34273.450000, 1686.144049, 1686.144049, 0.000000, X, Y) && !ellipse(34621.000000, 34660.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33159.460000, 34559.330000, 1820.616052, 1820.616052, 0.000000, X, Y) && !ellipse(33643.766022, 34238.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35724.499207, 34049.096069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34532.223785, 33519.693848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34439.420000, 33102.508360, 1804.512052, 1804.512052, 0.000000, X, Y) && !ellipse(35183.839661, 33015.740082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34493.085999, 32565.571899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34806.309936, 31756.135314, 1777.880051, 783.173736, 93.284052, X, Y) && !ellipse(35322.714000, 29794.192800, 1203.240035, 1203.240035, 0.000000, X, Y) && !ellipse(35725.458000, 26302.570400, 915.232026, 915.232026, 0.000000, X, Y) && !ellipse(35651.844000, 24920.566000, 1661.088048, 1661.088048, 0.000000, X, Y) && !ellipse(34979.097076, 24925.133026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28971.894165, 34885.563049, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(35809.136230, 34988.055145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35912.653168, 34481.295013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35122.667786, 34229.072540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34477.955000, 33983.638000, 698.292020, 698.292020, 0.000000, X, Y) && !ellipse(35616.771393, 33634.372528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36089.966000, 33224.736600, 1161.152033, 1161.152033, 0.000000, X, Y)
[Mon Dec 26 10:51:13 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20.gif
[Mon Dec 26 12:10:04 2011] Mean detx,y = (2410.65, 7103.65) 
[Mon Dec 26 12:10:08 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 12:11:30 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 12:11:30 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Dec 26 12:11:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Dec 27 20:54:46 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:46 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Dec 27 20:55:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:01 2011] Using photon index=1.80, rate=0.0475, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src20.arf
[Tue Dec 27 20:55:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:01 2011] Updating source flux to 8e-13
[Tue Dec 27 20:55:44 2011] Flag p found in src. 20 procflags, skipping spectral fitting
[Tue Dec 27 20:55:44 2011] Flag c found in src. 20 procflags, skipping spectral fitting