[Wed Dec 21 22:42:09 2011] Detection parameters:
  Position = (322.1, 467.0) = 5 34 29.15 22 11 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 522.2 +/- 38.0
  Background counts = 222.0
  Rate = 0.03 +/- 0.002

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 12.34'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 12.60"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.910
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 12.60"
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9.ximg exists
[Thu Dec 22 17:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9.csv
[Thu Dec 22 17:51:55 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Dec 22 17:51:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9.csv
[Thu Dec 22 17:51:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:51:58 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Dec 22 17:51:59 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Dec 22 17:51:59 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Dec 23 21:49:43 2011] Warning, spatial fit 9 centroid is now closest to src. 28
[Fri Dec 23 21:49:44 2011] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.298026 pixels away
[Fri Dec 23 21:49:44 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:44 2011] Assessing source extent using major
[Fri Dec 23 21:49:44 2011] Source does appear to be extended
[Fri Dec 23 21:49:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 28
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 12.60"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.910
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 12.60"
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9.csv
[Sun Dec 25 02:57:41 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Dec 25 02:57:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9.csv
[Sun Dec 25 02:57:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:45 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Dec 25 02:57:45 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Dec 25 02:57:45 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 9 centroid is now closest to src. 37
[Mon Dec 26 10:49:20 2011] Source 16 is offset by 5.934181 and -5.991566 pixels which is larger than
2 X fitted extent = 1.560345 x 1.560345, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Source 16 is offset by 4.395043 and 3.403583 pixels which is larger than
2 X fitted extent = 1.447439 x 1.447439, not incorporating fit results
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:12 2011] XMMSAS src. selection expression = ellipse(27977.800751, 40579.647736, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:12 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16_src.reg
[Mon Dec 26 10:51:12 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (285, 429) - (360, 504)
[Mon Dec 26 10:51:12 2011] XMMSAS bgd. selection expression = annulus(27977.800751, 40579.647736, 1087.500000, 2175.000000, X, Y) && !ellipse(27909.413400, 41154.160000, 2061.120059, 1308.040038, 90.000000, X, Y) && !ellipse(27679.341400, 39943.667000, 1086.000031, 1086.000031, 0.000000, X, Y) && !ellipse(28140.482361, 39793.952881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27949.332400, 39552.754000, 1900.472055, 1900.472055, 0.000000, X, Y) && !ellipse(27987.175659, 41794.042206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.437744, 38322.360413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27808.024902, 37804.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.000000, 34136.518000, 10503.456302, 4676.064135, 0.000000, X, Y) && !ellipse(27858.372600, 42447.689200, 1642.824047, 1642.824047, 0.000000, X, Y) && !ellipse(28430.871072, 41768.465084, 1646.320047, 1330.518657, 89.393040, X, Y) && !ellipse(28039.220000, 36665.521800, 2645.376076, 1559.368045, 84.457000, X, Y) && !ellipse(27871.338000, 43756.016000, 1439.704041, 1439.704041, 0.000000, X, Y) && !ellipse(27530.797363, 43275.495453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28899.491516, 41356.020782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28874.789124, 37975.167542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28404.871395, 36662.693056, 1763.720051, 881.656119, 90.002801, X, Y) && !ellipse(32244.296000, 34660.780600, 10368.840298, 10368.840298, 0.000000, X, Y) && !ellipse(28336.041199, 43277.932770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28800.997894, 39900.698334, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:12 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16.gif
[Mon Dec 26 11:53:55 2011] Mean detx,y = (13333.82, -57.62) 
[Mon Dec 26 11:53:58 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 11:54:54 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 11:54:54 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Mon Dec 26 11:54:54 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Dec 26 19:28:52 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 26 19:28:52 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:45 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:45 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Tue Dec 27 20:55:01 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:01 2011] Using photon index=1.80, rate=0.0257, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src16.arf
[Tue Dec 27 20:55:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:01 2011] Updating source flux to 6.4e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting