[Wed Dec 21 22:42:13 2011] Detection parameters:
  Position = (388.3, 226.2) = 5 34 8.49 21 54 14.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.7 +/- 23.6
  Background counts = 266.5
  Rate = 0.01 +/- 0.001

[Wed Dec 21 22:42:16 2011] Off-axis axis estimate = 8.36'
[Wed Dec 21 22:53:34 2011] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Wed Dec 21 22:53:34 2011] Initial guess for spatial extent in simple fitting = 10.61"
[Wed Dec 21 22:53:34 2011] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.753
[Wed Dec 21 22:53:34 2011] Giving source the simple spatial ID 89 for pass 0, mean size = 10.61"
[Thu Dec 22 17:51:58 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89.ximg exists
[Thu Dec 22 17:51:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89.csv
[Thu Dec 22 17:51:58 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89_1.ximg exists
[Thu Dec 22 17:51:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89.csv
[Thu Dec 22 17:51:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Thu Dec 22 17:52:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89.csv
[Thu Dec 22 17:52:01 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Thu Dec 22 17:52:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89.csv
[Thu Dec 22 17:52:01 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 23 21:49:44 2011] Spatial fit model total counts = 1879.160000, observed total counts = 2492.000000
[Fri Dec 23 21:49:44 2011] Poor agreement between spatial fit and data for source 102
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Dec 23 21:49:45 2011] Vigneting correction estimate = 1.000000
[Fri Dec 23 21:49:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 23 21:49:45 2011] Assessing source extent using major
[Fri Dec 23 21:49:45 2011] Source does appear to be extended
[Fri Dec 23 21:49:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 23 21:49:45 2011] Source is confused with source 72
[Fri Dec 23 21:51:02 2011] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Fri Dec 23 21:51:02 2011] Initial guess for spatial extent in simple fitting = 10.61"
[Fri Dec 23 21:51:02 2011] source mask rpix=2.4, npix_max = 34, mask sum = 26, frac = 0.753
[Fri Dec 23 21:51:02 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 10.61"
[Sun Dec 25 02:57:44 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83.ximg exists
[Sun Dec 25 02:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83.csv
[Sun Dec 25 02:57:44 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83_1.ximg exists
[Sun Dec 25 02:57:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83.csv
[Sun Dec 25 02:57:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Sun Dec 25 02:57:49 2011] fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Sun Dec 25 02:57:49 2011] Fit fullrun_mos1_xmm0412591601_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Mon Dec 26 10:49:20 2011] Warning, spatial fit 83 centroid is now closest to src. 83
[Mon Dec 26 10:49:20 2011] Vigneting correction estimate = 1.000000
[Mon Dec 26 10:49:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 26 10:49:20 2011] Assessing source extent using major
[Mon Dec 26 10:49:20 2011] Source does appear to be extended
[Mon Dec 26 10:49:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 26 10:51:29 2011] XMMSAS src. selection expression = ellipse(33733.646729, 19634.700409, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 26 10:51:29 2011] Writing source region out to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102_src.reg
[Mon Dec 26 10:51:29 2011] Extracting stamp from image fullrun_mos1_xmm0412591601_pi300-10000_cl_sm2.00.img.gz, (351, 189) - (426, 264)
[Mon Dec 26 10:51:29 2011] XMMSAS bgd. selection expression = annulus(33733.646729, 19634.700409, 1087.500000, 2175.000000, X, Y) && !ellipse(33925.254883, 22572.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33577.000000, 20129.311127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34566.104614, 22316.850830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34182.519257, 18832.574905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34337.533142, 20676.819321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33888.594238, 21795.379181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34569.115417, 21092.461502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33720.854797, 18229.336319, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 26 10:51:29 2011] Writing fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102.gif
[Mon Dec 26 17:07:37 2011] Mean detx,y = (-7261.89, 6920.63) 
[Mon Dec 26 17:07:40 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 26 17:08:10 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 26 17:08:10 2011] Setting source spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Mon Dec 26 17:08:10 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Tue Dec 27 01:14:53 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Dec 27 01:14:53 2011] rmf not generated due to insufficient counts
[Tue Dec 27 20:54:54 2011] Updating aperture counts using extracted products
[Tue Dec 27 20:54:54 2011] Error reading totcts from fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Tue Dec 27 20:55:07 2011] Calculating source flux in energy range 0.30-8.00
[Tue Dec 27 20:55:07 2011] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0412591601_pi300-10000_pass1_cl_src102.arf
[Tue Dec 27 20:55:07 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Dec 27 20:55:07 2011] Updating source flux to 2.1e-13
[Tue Dec 27 20:55:44 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting