[Wed Feb 15 10:15:05 2012] Detection parameters:
  Position = (310.5, 213.5) = 5 34 32.73 21 53 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.0 +/- 22.6
  Background counts = 248.1
  Rate = 0.04 +/- 0.004

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 6.22'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 15, frac = 0.517
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 9.54"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu Feb 16 00:43:51 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 2833.050000, observed total counts = 2828.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 94 = 5.759152 pixels
[Thu Feb 16 00:44:35 2012] 2516.484000 total counts/ 1586.280000 bgd. counts: snr = 23.355452
Spatial fit parameters:
  Offset between fit and detection position for source 94 = 5.759152 pixels
  Position = (316.1, 212.3) = 5 34 30.97 21 53 17.2
  Extent = 19.1 (19.0-19.1)", rotation angle = 0
  Source counts = 930.2 +/- 50.2
  Background counts = 1586.3
  Rate = 0.1 +/- 0.006
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 64
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 19.06"
[Thu Feb 16 09:35:11 2012] source mask rpix=4.4, npix_max = 95, mask sum = 94, frac = 0.987
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 19.06"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35.csv
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35.csv
[Thu Feb 16 19:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 35 centroid is now closest to src. 61
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:28 2012] XMMSAS src. selection expression = ellipse(27454.718000, 18421.862000, 1143.318033, 1143.318033, 0.000000, X, Y)
[Thu Feb 16 22:52:28 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94_src.reg
[Thu Feb 16 22:52:28 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (250, 147) - (382, 278)
[Thu Feb 16 22:52:28 2012] XMMSAS bgd. selection expression = annulus(27454.718000, 18421.862000, 1905.530055, 3811.060110, X, Y) && !ellipse(27420.326000, 19206.060000, 1474.544042, 1474.544042, 0.000000, X, Y) && !ellipse(29621.258575, 19327.546707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27306.348340, 20356.571619, 1418.688041, 1270.722391, 0.000000, X, Y) && !ellipse(28306.466827, 20207.992920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.328000, 20441.422800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(26263.313200, 19753.614000, 1470.488042, 1470.488042, 0.000000, X, Y) && !ellipse(26408.781982, 19305.142242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.000000, 18027.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.368469, 20507.079315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29929.018000, 20174.948800, 1484.864043, 1484.864043, 0.000000, X, Y) && !ellipse(25775.380000, 20192.325520, 2615.432075, 2615.432075, 0.000000, X, Y) && !ellipse(30951.358000, 20060.904800, 1533.472044, 1533.472044, 0.000000, X, Y) && !ellipse(27185.992000, 17620.302400, 1583.024046, 1583.024046, 0.000000, X, Y) && !ellipse(23199.167511, 20610.714401, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:28 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94.gif
[Thu Feb 16 23:36:35 2012] Mean detx,y = (-760.11, -8960.91) 
[Thu Feb 16 23:36:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:36:54 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:36:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Thu Feb 16 23:36:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.111, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src94.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 1.9e-12
[Fri Feb 17 03:06:14 2012] Flag c found in src. 94 procflags, skipping spectral fitting