[Wed Feb 15 10:15:05 2012] Detection parameters:
  Position = (404.0, 313.7) = 5 34 3.47 22 0 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.2 +/- 23.5
  Background counts = 262.3
  Rate = 0.03 +/- 0.005

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 7.73'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.30 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.30"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.095
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 59 for pass 0, mean size = 10.30"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 82 is offset by -0.113696 and 2.581220 pixels which is larger than
2 X fitted extent = 1.141903 x 1.141903, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Source 82 is offset by 1.918557 and -3.386527 pixels which is larger than
2 X fitted extent = 1.137876 x 1.137876, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 3020.920000, observed total counts = 3024.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 82 = 6.008854 pixels
[Thu Feb 16 00:44:35 2012] 2897.150000 total counts/ 1628.750000 bgd. counts: snr = 31.428888
Spatial fit parameters:
  Offset between fit and detection position for source 82 = 6.008854 pixels
  Position = (399.0, 310.5) = 5 34 5.06 22 0 24.1
  Extent = 20.6 (20.5-41.2)", rotation angle = 0
  Source counts = 1268.4 +/- 53.8
  Background counts = 1628.8
  Rate = 0.2 +/- 0.006
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 86
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 20.59"
[Thu Feb 16 09:35:11 2012] source mask rpix=4.7, npix_max = 109, mask sum = 110, frac = 1.004
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 20.59"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src49.ximg exists
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src49_1.ximg exists
[Thu Feb 16 19:06:27 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src49 appears to have run properly
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Thu Feb 16 19:07:06 2012] Source 82 is offset by -3.137954 and -6.632759 pixels which is larger than
2 X fitted extent = 1.137876 x 1.137876, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 49 centroid is now closest to src. 79
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] Counts = 1268.400000, rescaling region sizes by 2.000000
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(34661.458000, 26962.410000, 2471.016071, 2471.016071, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (257, 168) - (541, 452)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(34661.458000, 26962.410000, 8236.720237, 16473.440474, X, Y) && !ellipse(27710.117235, 34305.555947, 1661.848048, 552.224637, 352.510707, X, Y) && !ellipse(27872.866028, 35210.780243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.642426, 35108.890839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29915.024292, 34364.311768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.818800, 28565.514000, 1448.296042, 1448.296042, 0.000000, X, Y) && !ellipse(28843.539429, 34382.427032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.291718, 36477.263733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27420.326000, 19206.060000, 1474.544042, 1474.544042, 0.000000, X, Y) && !ellipse(25792.038000, 34318.557600, 1595.208046, 1595.208046, 0.000000, X, Y) && !ellipse(27457.184021, 35625.116150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(29441.956482, 34393.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20394.852554, 29355.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.283600, 37048.384000, 917.032026, 917.032026, 0.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20130.357208, 26055.872833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.180023, 37527.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.258575, 19327.546707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.880341, 34403.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(33831.874847, 25347.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.894000, 44116.762000, 2202.424063, 2202.424063, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.416290, 34845.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.315598, 26575.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(27306.348340, 20356.571619, 1418.688041, 1270.722391, 0.000000, X, Y) && !ellipse(28306.466827, 20207.992920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.328000, 20441.422800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(34259.634583, 28157.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.313200, 19753.614000, 1470.488042, 1470.488042, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(34115.269631, 27569.629056, 1470.488042, 1216.573756, 69.351754, X, Y) && !ellipse(27454.718000, 18421.862000, 1524.424044, 1524.424044, 0.000000, X, Y) && !ellipse(26408.781982, 19305.142242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.000000, 18027.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34326.910370, 26139.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.844037, 26498.605438, 1849.528053, 893.678492, 90.760454, X, Y) && !ellipse(24012.368469, 20507.079315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20092.138062, 28138.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(29929.018000, 20174.948800, 1484.864043, 1484.864043, 0.000000, X, Y) && !ellipse(25775.380000, 20192.325520, 2615.432075, 2615.432075, 0.000000, X, Y) && !ellipse(20506.542999, 33922.453827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.425629, 41796.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19964.210000, 26800.471600, 1453.384042, 1453.384042, 0.000000, X, Y) && !ellipse(24617.378000, 34416.201800, 1606.888046, 1606.888046, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.570000, 30146.746000, 1510.816043, 1510.816043, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(33664.005310, 23708.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.005310, 24311.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19822.644400, 25120.072000, 2532.528073, 2532.528073, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(20613.965485, 31890.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(31583.232300, 34095.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20344.108307, 26924.927643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30951.358000, 20060.904800, 1533.472044, 1533.472044, 0.000000, X, Y) && !ellipse(27415.760254, 36912.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.593353, 29860.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27044.313690, 36750.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.992000, 17620.302400, 1583.024046, 1583.024046, 0.000000, X, Y) && !ellipse(23199.167511, 20610.714401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.284302, 32298.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.000000, 12590.275787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82.gif
[Thu Feb 16 23:56:19 2012] Mean detx,y = (-7874.24, -220.55) 
[Thu Feb 16 23:56:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:59:39 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:59:39 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Thu Feb 16 23:59:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.152, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src82.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 2.1e-12
[Fri Feb 17 03:06:14 2012] Flag b found in src. 82 procflags, skipping spectral fitting
[Fri Feb 17 03:06:14 2012] Flag c found in src. 82 procflags, skipping spectral fitting