[Wed Feb 15 10:15:04 2012] Detection parameters:
  Position = (403.0, 333.0) = 5 34 3.80 22 2 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 117.7 +/- 24.1
  Background counts = 212.9
  Rate = 0.02 +/- 0.004

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 7.98'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.42 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.42"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.074
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 10.42"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src72.ximg exists
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src72_1.ximg exists
[Thu Feb 16 00:43:50 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src72 appears to have run properly
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 78 is offset by -8.514296 and -2.441084 pixels which is larger than
2 X fitted extent = 1.184607 x 1.184607, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 3140.590000, observed total counts = 3148.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 78 = 5.263345 pixels
[Thu Feb 16 00:44:35 2012] 3060.987000 total counts/ 2808.190000 bgd. counts: snr = 4.770443
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 5.263345 pixels
  Position = (399.4, 336.9) = 5 34 4.91 22 2 19.1
  Extent = 20.8 (20.8-41.7)", rotation angle = 0
  Source counts = 252.8 +/- 55.3
  Background counts = 2808.2
  Rate = 0.03 +/- 0.007
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 45
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 20.84"
[Thu Feb 16 09:35:11 2012] source mask rpix=4.8, npix_max = 111, mask sum = 106, frac = 0.947
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 20.84"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61.csv
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61.csv
[Thu Feb 16 19:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu Feb 16 19:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu Feb 16 19:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu Feb 16 19:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:07:06 2012] Source 78 is offset by -3.811379 and 2.697931 pixels which is larger than
2 X fitted extent = 1.152717 x 1.152717, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 61 centroid is now closest to src. 49
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(34700.202000, 29263.512000, 1250.376036, 1250.376036, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (328, 265) - (471, 409)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(34700.202000, 29263.512000, 2083.960060, 4167.920120, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33831.874847, 25347.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34259.634583, 28157.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34115.269631, 27569.629056, 1470.488042, 1216.573756, 69.351754, X, Y) && !ellipse(34326.910370, 26139.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.844037, 26498.605438, 1849.528053, 893.678492, 90.760454, X, Y) && !ellipse(34661.458000, 26962.410000, 1647.344047, 1647.344047, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.005310, 24311.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(31583.232300, 34095.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78.gif
[Fri Feb 17 00:15:21 2012] Mean detx,y = (-7480.97, 2138.78) 
[Fri Feb 17 00:15:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:15:40 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:15:40 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Feb 17 00:15:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0303, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src78.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 4.8e-13
[Fri Feb 17 03:06:14 2012] Flag b found in src. 78 procflags, skipping spectral fitting
[Fri Feb 17 03:06:14 2012] Flag c found in src. 78 procflags, skipping spectral fitting