[Wed Feb 15 10:15:04 2012] Detection parameters:
  Position = (305.5, 145.3) = 5 34 34.29 21 48 25.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.8 +/- 15.9
  Background counts = 71.1
  Rate = 0.01 +/- 0.002

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 11.12'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.8, npix_max = 42, mask sum = 31, frac = 0.731
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 11.99"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 71 is offset by -3.780069 and -7.741888 pixels which is larger than
2 X fitted extent = 3.926083 x 3.926083, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 11.99 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 11.99"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.8, npix_max = 42, mask sum = 31, frac = 0.731
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 11.99"
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74.ximg exists
[Thu Feb 16 19:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74.csv
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74_1.ximg exists
[Thu Feb 16 19:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74.csv
[Thu Feb 16 19:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Thu Feb 16 19:06:30 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Thu Feb 16 19:07:06 2012] Source 71 is offset by 7.855931 and 4.749699 pixels which is larger than
2 X fitted extent = 5.213563 x 5.213563, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:30 2012] XMMSAS src. selection expression = ellipse(26530.000000, 12590.275787, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:30 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71_src.reg
[Thu Feb 16 22:52:30 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (268, 108) - (343, 183)
[Thu Feb 16 22:52:30 2012] XMMSAS bgd. selection expression = annulus(26530.000000, 12590.275787, 1087.500000, 2175.000000, X, Y)
[Thu Feb 16 22:52:30 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71.gif
[Fri Feb 17 00:23:34 2012] Mean detx,y = (-196.15, -14902.99) 
[Fri Feb 17 00:23:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:23:55 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:23:55 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Fri Feb 17 00:23:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Fri Feb 17 02:53:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 02:53:44 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0123, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src71.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Getting flux using calc_pl_flux failed
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting