[Wed Feb 15 10:15:04 2012] Detection parameters:
  Position = (313.0, 222.9) = 5 34 31.94 21 54 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 466.7 +/- 30.3
  Background counts = 283.8
  Rate = 0.08 +/- 0.005

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 5.57'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.22"
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9.csv
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9.csv
[Thu Feb 16 00:43:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Feb 16 00:43:50 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 9 centroid is now closest to src. 62
[Thu Feb 16 00:44:35 2012] Source 64 is offset by -4.681797 and -2.774495 pixels which is larger than
2 X fitted extent = 1.035283 x 1.035283, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 59
[Thu Feb 16 00:44:35 2012] Source is confused with source 94
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.911
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 9.22"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8.csv
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8.csv
[Thu Feb 16 19:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Feb 16 19:06:28 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Feb 16 19:07:06 2012] Spatial fit model total counts = 3426.350000, observed total counts = 3429.000000
[Thu Feb 16 19:07:06 2012] Offset between fit and detection position for source 64 = 3.150063 pixels
[Thu Feb 16 19:07:06 2012] 2577.581000 total counts/ 898.371000 bgd. counts: snr = 56.024392
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 3.150063 pixels
  Position = (315.7, 221.3) = 5 34 31.09 21 53 56.4
  Extent = 18.4 (18.4-36.9)", rotation angle = 0
  Source counts = 1679.2 +/- 50.8
  Background counts = 898.4
  Rate = 0.2 +/- 0.006
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:26 2012] Counts = 1679.210000, rescaling region sizes by 2.000000
[Thu Feb 16 22:52:26 2012] XMMSAS src. selection expression = ellipse(27420.326000, 19206.060000, 2211.816064, 2211.816064, 0.000000, X, Y)
[Thu Feb 16 22:52:26 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64_src.reg
[Thu Feb 16 22:52:26 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (189, 94) - (443, 348)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(27420.326000, 19206.060000, 7372.720212, 14745.440424, X, Y) && !ellipse(27710.117235, 34305.555947, 1661.848048, 552.224637, 352.510707, X, Y) && !ellipse(29915.024292, 34364.311768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.818800, 28565.514000, 1448.296042, 1448.296042, 0.000000, X, Y) && !ellipse(28843.539429, 34382.427032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25792.038000, 34318.557600, 1595.208046, 1595.208046, 0.000000, X, Y) && !ellipse(29441.956482, 34393.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20394.852554, 29355.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20130.357208, 26055.872833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.258575, 19327.546707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.880341, 34403.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33831.874847, 25347.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.315598, 26575.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(27306.348340, 20356.571619, 1418.688041, 1270.722391, 0.000000, X, Y) && !ellipse(28306.466827, 20207.992920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.328000, 20441.422800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(34259.634583, 28157.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.313200, 19753.614000, 1470.488042, 1470.488042, 0.000000, X, Y) && !ellipse(34115.269631, 27569.629056, 1470.488042, 1216.573756, 69.351754, X, Y) && !ellipse(27454.718000, 18421.862000, 1524.424044, 1524.424044, 0.000000, X, Y) && !ellipse(26408.781982, 19305.142242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.000000, 18027.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34326.910370, 26139.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.844037, 26498.605438, 1849.528053, 893.678492, 90.760454, X, Y) && !ellipse(24012.368469, 20507.079315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20092.138062, 28138.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29929.018000, 20174.948800, 1484.864043, 1484.864043, 0.000000, X, Y) && !ellipse(25775.380000, 20192.325520, 2615.432075, 2615.432075, 0.000000, X, Y) && !ellipse(20506.542999, 33922.453827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34661.458000, 26962.410000, 1647.344047, 1647.344047, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19964.210000, 26800.471600, 1453.384042, 1453.384042, 0.000000, X, Y) && !ellipse(24617.378000, 34416.201800, 1606.888046, 1606.888046, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.570000, 30146.746000, 1510.816043, 1510.816043, 0.000000, X, Y) && !ellipse(33664.005310, 23708.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.005310, 24311.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19822.644400, 25120.072000, 2532.528073, 2532.528073, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(20613.965485, 31890.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(31583.232300, 34095.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20344.108307, 26924.927643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30951.358000, 20060.904800, 1533.472044, 1533.472044, 0.000000, X, Y) && !ellipse(17231.938721, 21406.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.593353, 29860.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.992000, 17620.302400, 1583.024046, 1583.024046, 0.000000, X, Y) && !ellipse(23199.167511, 20610.714401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.284302, 32298.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26530.000000, 12590.275787, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64.gif
[Thu Feb 16 23:03:15 2012] Mean detx,y = (-678.96, -8237.70) 
[Thu Feb 16 23:03:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:06:33 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:06:33 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Feb 16 23:06:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.201, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src64.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 2.9e-12
[Fri Feb 17 03:06:14 2012] Flag b found in src. 64 procflags, skipping spectral fitting
[Fri Feb 17 03:06:14 2012] Flag c found in src. 64 procflags, skipping spectral fitting