[Wed Feb 15 10:15:04 2012] Detection parameters:
  Position = (198.6, 246.6) = 5 35 7.70 21 55 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.5 +/- 20.8
  Background counts = 96.8
  Rate = 0.02 +/- 0.002

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 8.15'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.853
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 75 for pass 0, mean size = 10.51"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.815654 pixels away
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 10.51 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.853
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 10.51"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src64.ximg exists
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src64_1.ximg exists
[Thu Feb 16 19:06:27 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src64 appears to have run properly
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Thu Feb 16 19:06:30 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.249731 pixels away
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(17231.938721, 21406.591293, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (161, 209) - (236, 284)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(17231.938721, 21406.591293, 1087.500000, 2175.000000, X, Y) && !ellipse(19822.644400, 25120.072000, 2532.528073, 2532.528073, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56.gif
[Fri Feb 17 00:20:25 2012] Mean detx,y = (9579.33, -6563.12) 
[Fri Feb 17 00:20:26 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:20:46 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:20:46 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Feb 17 00:20:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Feb 17 02:47:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 02:47:57 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0198, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src56.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 5.8e-13
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting