[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (392.5, 334.9) = 5 34 7.07 22 2 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.3 +/- 24.8
  Background counts = 199.2
  Rate = 0.05 +/- 0.005

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 7.31'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.566
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.09"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Feb 16 00:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Feb 16 00:43:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28.csv
[Thu Feb 16 00:43:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 28 centroid is now closest to src. 76
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 78
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.566
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 10.09"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src23.ximg exists
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Feb 16 19:06:26 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src23 appears to have run properly
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Feb 16 19:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Feb 16 19:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Feb 16 19:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 23 centroid is now closest to src. 76
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(34099.002655, 29090.791687, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (355, 297) - (430, 372)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(34099.002655, 29090.791687, 1087.500000, 2175.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34259.634583, 28157.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34115.269631, 27569.629056, 1470.488042, 1216.573756, 69.351754, X, Y) && !ellipse(34326.910370, 26139.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.844037, 26498.605438, 1849.528053, 893.678492, 90.760454, X, Y) && !ellipse(34661.458000, 26962.410000, 1647.344047, 1647.344047, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47.gif
[Thu Feb 16 23:21:05 2012] Mean detx,y = (-6995.89, 1974.55) 
[Thu Feb 16 23:21:06 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:21:15 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:21:15 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Thu Feb 16 23:21:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Feb 17 01:03:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 01:03:10 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0524, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src47.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 1e-12
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting