[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (235.0, 338.0) = 5 34 56.35 22 2 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.9 +/- 23.8
  Background counts = 268.9
  Rate = 0.07 +/- 0.006

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 5.42'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.776
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.14"
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15.csv
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15.csv
[Thu Feb 16 00:43:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Feb 16 00:43:50 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 11.201963 pixels away
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 48
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 9.14 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 9.14"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 21, frac = 0.776
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.14"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13.csv
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13.csv
[Thu Feb 16 19:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Feb 16 19:06:28 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 13 centroid is now closest to src. 75
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(20394.852554, 29355.914948, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (197, 300) - (272, 375)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(20394.852554, 29355.914948, 1087.500000, 2175.000000, X, Y) && !ellipse(20133.818800, 28565.514000, 1448.296042, 1448.296042, 0.000000, X, Y) && !ellipse(20253.315598, 26575.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20092.138062, 28138.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19964.210000, 26800.471600, 1453.384042, 1453.384042, 0.000000, X, Y) && !ellipse(19386.570000, 30146.746000, 1510.816043, 1510.816043, 0.000000, X, Y) && !ellipse(19822.644400, 25120.072000, 2532.528073, 2532.528073, 0.000000, X, Y) && !ellipse(20613.965485, 31890.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20344.108307, 26924.927643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.593353, 29860.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.284302, 32298.016632, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46.gif
[Thu Feb 16 23:11:32 2012] Mean detx,y = (7097.76, 1498.59) 
[Thu Feb 16 23:11:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:11:42 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:11:42 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Thu Feb 16 23:11:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Feb 17 00:48:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 00:48:15 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0665, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src46.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 1.7e-12
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting