[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (236.5, 351.9) = 5 34 55.88 22 3 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.0 +/- 19.3
  Background counts = 250.7
  Rate = 0.02 +/- 0.002

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 5.93'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.2, npix_max = 28, mask sum = 18, frac = 0.636
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 81 for pass 0, mean size = 9.39"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu Feb 16 00:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu Feb 16 00:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu Feb 16 00:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 3298.780000, observed total counts = 3297.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 44 = 1.138140 pixels
[Thu Feb 16 00:44:35 2012] Warning, changing simple spatial fit ID from 81 to 65
[Thu Feb 16 00:44:35 2012] 3298.394400 total counts/ 3271.320000 bgd. counts: snr = 0.473366
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.138140 pixels
  Position = (236.0, 350.9) = 5 34 56.03 22 3 20.0
  Extent = 2.4 (2.4-4.0)", rotation angle = 0
  Source counts = 27.1 +/- 57.4
  Background counts = 3271.3
  Rate = 0.003 +/- 0.007
  Deleting source due to low Poisson probability