[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (399.3, 367.9) = 5 34 4.95 22 4 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 226.1 +/- 25.2
  Background counts = 158.9
  Rate = 0.05 +/- 0.006

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 8.88'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.751
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 10.87"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Feb 16 00:43:51 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 30 centroid is now closest to src. 72
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.5, npix_max = 35, mask sum = 27, frac = 0.751
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 10.87"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25.csv
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25.csv
[Thu Feb 16 19:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 25 centroid is now closest to src. 72
[Thu Feb 16 19:07:06 2012] Source 41 is offset by -3.331694 and 2.325472 pixels which is larger than
2 X fitted extent = 1.197715 x 1.197715, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(34686.252655, 31959.426056, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (362, 330) - (437, 405)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(34686.252655, 31959.426056, 1087.500000, 2175.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41.gif
[Thu Feb 16 23:22:17 2012] Mean detx,y = (-7231.29, 4870.32) 
[Thu Feb 16 23:22:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:22:39 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:22:39 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu Feb 16 23:22:39 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Feb 17 01:07:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 01:07:51 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0515, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src41.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 1e-12
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting