[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (363.6, 392.5) = 5 34 16.11 22 6 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.3 +/- 23.8
  Background counts = 160.9
  Rate = 0.02 +/- 0.003

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 8.29'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.786
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 10.58"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Thu Feb 16 00:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Thu Feb 16 00:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73.csv
[Thu Feb 16 00:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 73 centroid is now closest to src. 70
[Thu Feb 16 00:44:35 2012] Source 38 is offset by -2.125744 and -0.017919 pixels which is larger than
2 X fitted extent = 1.862699 x 1.862699, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 10.58 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 10.58"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.4, npix_max = 34, mask sum = 27, frac = 0.786
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 10.58"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62.csv
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62.csv
[Thu Feb 16 19:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Feb 16 19:06:30 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 13.744232 pixels away
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:06 2012] Source is confused with source 37
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(31583.232300, 34095.567047, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (326, 355) - (401, 430)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(31583.232300, 34095.567047, 1087.500000, 2175.000000, X, Y) && !ellipse(29915.024292, 34364.311768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28843.539429, 34382.427032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29441.956482, 34393.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.416290, 34845.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38.gif
[Fri Feb 17 00:15:45 2012] Mean detx,y = (-4000.33, 7009.56) 
[Fri Feb 17 00:15:46 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:15:59 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:15:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Feb 17 00:15:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Fri Feb 17 02:43:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 02:43:01 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0201, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src38.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 4.5e-13
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting