[Wed Feb 15 10:15:03 2012] Detection parameters:
  Position = (279.3, 396.3) = 5 34 42.49 22 6 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223.4 +/- 20.5
  Background counts = 168.1
  Rate = 0.03 +/- 0.002

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 7.23'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.697
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 10.04"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 1457.630000, observed total counts = 1570.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 32 = 4.211795 pixels
[Thu Feb 16 00:44:35 2012] 1480.326500 total counts/ 77.086500 bgd. counts: snr = 159.824293
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.211795 pixels
  Position = (283.5, 396.1) = 5 34 41.17 22 6 36.9
  Extent = 20.1 (20.0-40.2)", rotation angle = 0
  Source counts = 1403.2 +/- 38.5
  Background counts = 77.1
  Rate = 0.2 +/- 0.005
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 34
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 20.09"
[Thu Feb 16 09:35:11 2012] source mask rpix=4.6, npix_max = 104, mask sum = 52, frac = 0.496
[Thu Feb 16 09:35:11 2012] Skipping simple spatial due to low active detector fraction
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] Counts = 1403.240000, rescaling region sizes by 2.000000
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(24617.378000, 34416.201800, 2410.332069, 2410.332069, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (145, 258) - (422, 535)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(24617.378000, 34416.201800, 8034.440231, 16068.880462, X, Y) && !ellipse(27710.117235, 34305.555947, 1661.848048, 552.224637, 352.510707, X, Y) && !ellipse(27872.866028, 35210.780243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.642426, 35108.890839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29915.024292, 34364.311768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.818800, 28565.514000, 1448.296042, 1448.296042, 0.000000, X, Y) && !ellipse(28843.539429, 34382.427032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.291718, 36477.263733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27420.326000, 19206.060000, 1474.544042, 1474.544042, 0.000000, X, Y) && !ellipse(25792.038000, 34318.557600, 1595.208046, 1595.208046, 0.000000, X, Y) && !ellipse(27457.184021, 35625.116150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(29441.956482, 34393.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20394.852554, 29355.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.283600, 37048.384000, 917.032026, 917.032026, 0.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20130.357208, 26055.872833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.180023, 37527.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29621.258575, 19327.546707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.880341, 34403.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(33831.874847, 25347.619873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.894000, 44116.762000, 2202.424063, 2202.424063, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.416290, 34845.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.315598, 26575.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(27306.348340, 20356.571619, 1418.688041, 1270.722391, 0.000000, X, Y) && !ellipse(28306.466827, 20207.992920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25092.328000, 20441.422800, 1403.976040, 1403.976040, 0.000000, X, Y) && !ellipse(34259.634583, 28157.891388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26263.313200, 19753.614000, 1470.488042, 1470.488042, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(34115.269631, 27569.629056, 1470.488042, 1216.573756, 69.351754, X, Y) && !ellipse(27454.718000, 18421.862000, 1524.424044, 1524.424044, 0.000000, X, Y) && !ellipse(26408.781982, 19305.142242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26704.000000, 18027.191681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34326.910370, 26139.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.844037, 26498.605438, 1849.528053, 893.678492, 90.760454, X, Y) && !ellipse(24012.368469, 20507.079315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20092.138062, 28138.692871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(29929.018000, 20174.948800, 1484.864043, 1484.864043, 0.000000, X, Y) && !ellipse(25775.380000, 20192.325520, 2615.432075, 2615.432075, 0.000000, X, Y) && !ellipse(20506.542999, 33922.453827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(34661.458000, 26962.410000, 1647.344047, 1647.344047, 0.000000, X, Y) && !ellipse(35231.908966, 29951.042419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27805.425629, 41796.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19964.210000, 26800.471600, 1453.384042, 1453.384042, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.570000, 30146.746000, 1510.816043, 1510.816043, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(33664.005310, 23708.264069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.005310, 24311.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35037.093536, 30945.106628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19822.644400, 25120.072000, 2532.528073, 2532.528073, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(20613.965485, 31890.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(31583.232300, 34095.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20344.108307, 26924.927643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30951.358000, 20060.904800, 1533.472044, 1533.472044, 0.000000, X, Y) && !ellipse(17231.938721, 21406.591293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.760254, 36912.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.593353, 29860.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27044.313690, 36750.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35378.254181, 31419.493988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27185.992000, 17620.302400, 1583.024046, 1583.024046, 0.000000, X, Y) && !ellipse(23199.167511, 20610.714401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.284302, 32298.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32.gif
[Fri Feb 17 00:00:38 2012] Mean detx,y = (2766.01, 7583.07) 
[Fri Feb 17 00:00:40 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:05:35 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:05:35 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Feb 17 00:05:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.168, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src32.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 3.1e-12
[Fri Feb 17 03:06:14 2012] Flag c found in src. 32 procflags, skipping spectral fitting