[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (320.9, 415.0) = 5 34 29.48 22 7 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.9 +/- 33.1
  Background counts = 206.9
  Rate = 0.08 +/- 0.007

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 8.61'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.73"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.994
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.73"
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5.csv
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5.csv
[Thu Feb 16 00:43:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Feb 16 00:43:50 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 26 is offset by -1.005184 and 3.220889 pixels which is larger than
2 X fitted extent = 3.199807 x 3.199807, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 5 centroid is now closest to src. 23
[Thu Feb 16 00:44:35 2012] Source 26 is offset by -6.958786 and 4.007280 pixels which is larger than
2 X fitted extent = 1.689163 x 1.689163, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 2876.120000, observed total counts = 2873.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 26 = 1.116494 pixels
[Thu Feb 16 00:44:35 2012] Warning, changing simple spatial fit ID from 5 to 79
[Thu Feb 16 00:44:35 2012] 2817.920000 total counts/ 2817.920000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 1.116494 pixels
  Position = (321.1, 413.9) = 5 34 29.41 22 7 54.2
  Extent = 2.7" x 2.7", rotation angle = 0
  Source counts = 0.0 +/- 53.1
  Background counts = 2817.9
  Rate = 3e-18 +/- 0.006
  Deleting source due to low Poisson probability