[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (315.2, 418.9) = 5 34 31.26 22 8 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 228.8 +/- 28.1
  Background counts = 210.5
  Rate = 0.05 +/- 0.006

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 8.82'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.84"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Feb 16 00:43:51 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 33 centroid is now closest to src. 22
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 3374.640000, observed total counts = 3371.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 25 = 3.993622 pixels
[Thu Feb 16 00:44:35 2012] Warning, changing simple spatial fit ID from 33 to 76
[Thu Feb 16 00:44:35 2012] 3429.598000 total counts/ 3193.730000 bgd. counts: snr = 4.173687
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.993622 pixels
  Position = (312.6, 415.9) = 5 34 32.06 22 8 2.8
  Extent = 21.8 (21.4-22.1)" x 12.6 (6.5-20.9)", rotation angle = 76 (50-90) degrees
  Source counts = 235.9 +/- 58.6
  Background counts = 3193.7
  Rate = 0.03 +/- 0.007
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Thu Feb 16 00:44:35 2012] Source is confused with source 24
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 17.23"
[Thu Feb 16 09:35:11 2012] source mask rpix=4.0, npix_max = 79, mask sum = 81, frac = 1.018
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 17.23"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28.csv
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28.csv
[Thu Feb 16 19:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Feb 16 19:07:06 2012] Spatial fit model total counts = 7312.750000, observed total counts = 7314.000000
[Thu Feb 16 19:07:06 2012] Offset between fit and detection position for source 25 = 1.067962 pixels
[Thu Feb 16 19:07:06 2012] 7127.276000 total counts/ 6322.030000 bgd. counts: snr = 10.127454
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.067962 pixels
  Position = (312.4, 416.9) = 5 34 32.13 22 8 7.4
  Extent = 34.5 (34.4-68.9)", rotation angle = 0
  Source counts = 805.2 +/- 84.4
  Background counts = 6322.0
  Rate = 0.1 +/- 0.01
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(27129.972200, 36224.899720, 2067.684059, 2067.684059, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (194, 298) - (431, 536)
[Thu Feb 16 22:52:28 2012] XMMSAS bgd. selection expression = annulus(27129.972200, 36224.899720, 3446.140099, 6892.280198, X, Y) && !ellipse(27710.117235, 34305.555947, 1661.848048, 552.224637, 352.510707, X, Y) && !ellipse(27872.866028, 35210.780243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.642426, 35108.890839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29915.024292, 34364.311768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20133.818800, 28565.514000, 1448.296042, 1448.296042, 0.000000, X, Y) && !ellipse(28843.539429, 34382.427032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.291718, 36477.263733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25792.038000, 34318.557600, 1595.208046, 1595.208046, 0.000000, X, Y) && !ellipse(27457.184021, 35625.116150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(29441.956482, 34393.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20394.852554, 29355.914948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.283600, 37048.384000, 917.032026, 917.032026, 0.000000, X, Y) && !ellipse(34162.718048, 29947.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.180023, 37527.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26352.880341, 34403.802673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(34099.002655, 29090.791687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28422.894000, 44116.762000, 2202.424063, 2202.424063, 0.000000, X, Y) && !ellipse(34686.252655, 31959.426056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28609.416290, 34845.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(20506.542999, 33922.453827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(27805.425629, 41796.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.378000, 34416.201800, 1606.888046, 1606.888046, 0.000000, X, Y) && !ellipse(34138.405945, 30830.263336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.570000, 30146.746000, 1510.816043, 1510.816043, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(20613.965485, 31890.214752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35326.466000, 28136.606000, 1648.968047, 1648.968047, 0.000000, X, Y) && !ellipse(34700.202000, 29263.512000, 1667.168048, 1667.168048, 0.000000, X, Y) && !ellipse(31583.232300, 34095.567047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.760254, 36912.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34199.041504, 31354.140442, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.593353, 29860.978516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27044.313690, 36750.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.284302, 32298.016632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:28 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25.gif
[Thu Feb 16 23:23:17 2012] Mean detx,y = (342.09, 8593.33) 
[Thu Feb 16 23:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:24:08 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:24:08 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu Feb 16 23:24:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0964, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src25.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 1.8e-12
[Fri Feb 17 03:06:14 2012] Flag c found in src. 25 procflags, skipping spectral fitting