[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (322.2, 431.9) = 5 34 29.05 22 9 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 464.4 +/- 33.4
  Background counts = 157.4
  Rate = 0.06 +/- 0.004

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 9.83'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 11.34"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu Feb 16 00:43:51 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 24 centroid is now closest to src. 24
[Thu Feb 16 00:44:35 2012] Source 22 is offset by 1.032322 and 2.024492 pixels which is larger than
2 X fitted extent = 1.245835 x 1.245835, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Source 22 is offset by -5.078574 and 4.948331 pixels which is larger than
2 X fitted extent = 1.306441 x 1.306441, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Source 22 is offset by 0.478322 and -5.597692 pixels which is larger than
2 X fitted extent = 1.394860 x 1.394860, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 9
[Thu Feb 16 00:44:35 2012] Source is confused with source 21
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 11.34"
[Thu Feb 16 09:35:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.34"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src19.ximg exists
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src19_1.ximg exists
[Thu Feb 16 19:06:26 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src19 appears to have run properly
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 19 centroid is now closest to src. 24
[Thu Feb 16 19:07:06 2012] Source 22 is offset by 0.994322 and 4.106998 pixels which is larger than
2 X fitted extent = 1.280961 x 1.280961, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(27986.180023, 37527.096832, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (285, 394) - (360, 469)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(27986.180023, 37527.096832, 1087.500000, 2175.000000, X, Y) && !ellipse(27710.117235, 34305.555947, 1661.848048, 552.224637, 352.510707, X, Y) && !ellipse(27872.866028, 35210.780243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.642426, 35108.890839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27989.291718, 36477.263733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25792.038000, 34318.557600, 1595.208046, 1595.208046, 0.000000, X, Y) && !ellipse(27457.184021, 35625.116150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28094.283600, 37048.384000, 917.032026, 917.032026, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(28609.416290, 34845.448212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(24617.378000, 34416.201800, 1606.888046, 1606.888046, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(30495.884000, 34270.808000, 1702.408049, 549.034416, 3.028000, X, Y) && !ellipse(27415.760254, 36912.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27044.313690, 36750.899017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30966.025604, 34670.741974, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22.gif
[Thu Feb 16 23:13:39 2012] Mean detx,y = (-238.23, 10052.16) 
[Thu Feb 16 23:13:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:13:50 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:13:50 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Thu Feb 16 23:13:50 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Feb 17 00:57:24 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 00:57:24 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0556, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src22.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 1.3e-12
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting