[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (318.0, 462.1) = 5 34 30.39 22 11 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 202.4 +/- 24.7
  Background counts = 71.6
  Rate = 0.02 +/- 0.003

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 11.95'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 12.40 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 12.40"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.9, npix_max = 44, mask sum = 32, frac = 0.712
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 12.40"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 2468.660000, observed total counts = 2461.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 17 = 4.005323 pixels
[Thu Feb 16 00:44:35 2012] 2348.431000 total counts/ 2142.590000 bgd. counts: snr = 4.446951
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 4.005323 pixels
  Position = (315.8, 465.5) = 5 34 31.05 22 11 38.7
  Extent = 12.9 (9.3-21.0)", rotation angle = 0
  Source counts = 205.8 +/- 48.5
  Background counts = 2142.6
  Rate = 0.02 +/- 0.006
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 6
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Thu Feb 16 09:35:11 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.017
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 12.92"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55.csv
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55_1.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55.csv
[Thu Feb 16 19:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Thu Feb 16 19:06:30 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Thu Feb 16 19:07:06 2012] Source 17 is offset by 6.363657 and -2.006851 pixels which is larger than
2 X fitted extent = 1.752405 x 1.752405, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 55 centroid is now closest to src. 4
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(27429.962200, 40451.080000, 775.134022, 775.134022, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (271, 421) - (360, 510)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(27429.962200, 40451.080000, 1291.890037, 2583.780074, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(28094.283600, 37048.384000, 917.032026, 917.032026, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.180023, 37527.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(28422.894000, 44116.762000, 2202.424063, 2202.424063, 0.000000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(27805.425629, 41796.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17.gif
[Fri Feb 17 00:06:17 2012] Mean detx,y = (417.33, 12992.19) 
[Fri Feb 17 00:06:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:06:34 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:06:34 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 17 00:06:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0246, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src17.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 8.6e-13
[Fri Feb 17 03:06:14 2012] Flag b found in src. 17 procflags, skipping spectral fitting
[Fri Feb 17 03:06:14 2012] Flag c found in src. 17 procflags, skipping spectral fitting