[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (320.2, 481.0) = 5 34 29.69 22 12 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 236.3 +/- 24.7
  Background counts = 69.6
  Rate = 0.03 +/- 0.003

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 13.33'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Wed Feb 15 18:03:46 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.913
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 13.09"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 14 is offset by -3.500878 and 0.503499 pixels which is larger than
2 X fitted extent = 1.456326 x 1.456326, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 61 centroid is now closest to src. 15
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 1
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 13.09"
[Thu Feb 16 09:35:11 2012] source mask rpix=3.0, npix_max = 49, mask sum = 45, frac = 0.913
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 13.09"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51.csv
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu Feb 16 19:06:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51.csv
[Thu Feb 16 19:06:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Thu Feb 16 19:07:06 2012] Warning, spatial fit 51 centroid is now closest to src. 2
[Thu Feb 16 19:07:06 2012] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 27.739856 pixels away
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:29 2012] XMMSAS src. selection expression = ellipse(27805.425629, 41796.280396, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14_src.reg
[Thu Feb 16 22:52:29 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (283, 443) - (358, 518)
[Thu Feb 16 22:52:29 2012] XMMSAS bgd. selection expression = annulus(27805.425629, 41796.280396, 1087.500000, 2175.000000, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(28422.894000, 44116.762000, 2202.424063, 2202.424063, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:29 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14.gif
[Thu Feb 16 23:59:56 2012] Mean detx,y = (153.56, 14297.98) 
[Thu Feb 16 23:59:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Feb 17 00:00:07 2012] Binned source spectrum to 10 counts/bin
[Fri Feb 17 00:00:07 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 17 00:00:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Feb 17 02:09:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Feb 17 02:09:05 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:57 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:57 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Feb 17 02:58:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:58 2012] Using photon index=1.80, rate=0.0283, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src14.arf
[Fri Feb 17 02:58:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:58 2012] Updating source flux to 1e-10
[Fri Feb 17 03:06:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting