[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (318.5, 500.1) = 5 34 30.21 22 14 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.4 +/- 24.9
  Background counts = 63.9
  Rate = 0.02 +/- 0.003

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 14.69'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Wed Feb 15 18:03:46 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.041
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 13.77"
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85.csv
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85_1.ximg exists
[Thu Feb 16 00:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85.csv
[Thu Feb 16 00:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Thu Feb 16 00:43:52 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Thu Feb 16 00:43:52 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Thu Feb 16 00:44:35 2012] Source 13 is offset by 5.900214 and 6.476142 pixels which is larger than
2 X fitted extent = 1.611858 x 1.611858, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 85 centroid is now closest to src. 96
[Thu Feb 16 00:44:35 2012] Warning: source 87 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 14.554066 pixels away
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 12
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Thu Feb 16 09:35:11 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.041
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 73 for pass 1, mean size = 13.77"
[Thu Feb 16 19:06:27 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73.ximg exists
[Thu Feb 16 19:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73.csv
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu Feb 16 19:06:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73.csv
[Thu Feb 16 19:06:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu Feb 16 19:06:30 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu Feb 16 19:06:30 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Thu Feb 16 19:07:06 2012] Spatial fit model total counts = 3250.120000, observed total counts = 3249.000000
[Thu Feb 16 19:07:06 2012] Offset between fit and detection position for source 13 = 7.052328 pixels
[Thu Feb 16 19:07:06 2012] Warning, changing simple spatial fit ID from 73 to 17
[Thu Feb 16 19:07:06 2012] 2991.990025 total counts/ 2991.990000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 7.052328 pixels
  Position = (312.3, 496.7) = 5 34 32.15 22 13 54.2
  Extent = 26.5" x 26.5", rotation angle = 0
  Source counts = 0.0 +/- 54.7
  Background counts = 2992.0
  Rate = 3e-09 +/- 0.007
  Deleting source due to low Poisson probability