[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (324.8, 499.1) = 5 34 28.24 22 14 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 430.7 +/- 29.7
  Background counts = 61.6
  Rate = 0.05 +/- 0.004

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 14.67'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Wed Feb 15 18:03:46 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.912
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.77"
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29.csv
[Thu Feb 16 00:43:49 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Feb 16 00:43:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29.csv
[Thu Feb 16 00:43:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Feb 16 00:43:51 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Feb 16 00:43:51 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Feb 16 00:44:35 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.122695 pixels away
[Thu Feb 16 00:44:35 2012] Warning, spatial fit 29 centroid is now closest to src. 67
[Thu Feb 16 00:44:35 2012] Source 12 is offset by -9.057955 and -3.744325 pixels which is larger than
2 X fitted extent = 1.543315 x 1.543315, not incorporating fit results
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 67
[Thu Feb 16 00:44:35 2012] Source is confused with source 13
[Thu Feb 16 00:44:35 2012] Source is confused with source 96
[Thu Feb 16 09:35:11 2012] Using EEF radius (= 13.77 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 13.77"
[Thu Feb 16 09:35:11 2012] source mask rpix=3.2, npix_max = 53, mask sum = 49, frac = 0.912
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 13.77"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24.csv
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu Feb 16 19:06:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24.csv
[Thu Feb 16 19:06:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu Feb 16 19:06:29 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu Feb 16 19:06:29 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu Feb 16 19:07:06 2012] Spatial fit model total counts = 2564.670000, observed total counts = 2561.000000
[Thu Feb 16 19:07:06 2012] Offset between fit and detection position for source 12 = 8.894007 pixels
[Thu Feb 16 19:07:06 2012] 1977.937000 total counts/ 1420.650000 bgd. counts: snr = 14.785478
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 8.894007 pixels
  Position = (327.3, 507.6) = 5 34 27.47 22 14 41.9
  Extent = 27.5 (27.5-55.1)", rotation angle = 0
  Source counts = 557.3 +/- 44.5
  Background counts = 1420.7
  Rate = 0.07 +/- 0.005
[Thu Feb 16 19:07:06 2012] Source 12 is offset by 6.488926 and 4.938230 pixels which is larger than
2 X fitted extent = 1.543315 x 1.543315, not incorporating fit results
[Thu Feb 16 19:07:06 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:07:06 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:07:06 2012] Source does appear to be extended
[Thu Feb 16 19:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 22:52:27 2012] XMMSAS src. selection expression = ellipse(28422.894000, 44116.762000, 1651.818048, 1651.818048, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing source region out to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12_src.reg
[Thu Feb 16 22:52:27 2012] Extracting stamp from image fullrun_mos2_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (232, 413) - (422, 595)
[Thu Feb 16 22:52:27 2012] XMMSAS bgd. selection expression = annulus(28422.894000, 44116.762000, 2753.030079, 5506.060158, X, Y) && !ellipse(28365.678000, 41318.858200, 1011.352029, 1011.352029, 0.000000, X, Y) && !ellipse(28119.766400, 39376.753000, 1942.784056, 496.566414, 90.000000, X, Y) && !ellipse(28236.740448, 42067.528809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28323.607697, 40491.522003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28295.100920, 39872.292000, 3215.568093, 1572.816045, 92.192000, X, Y) && !ellipse(27129.972200, 36224.899720, 2756.912079, 2756.912079, 0.000000, X, Y) && !ellipse(27430.340000, 42474.190000, 2094.760060, 2094.760060, 0.000000, X, Y) && !ellipse(28586.527283, 38928.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27543.047600, 41007.906000, 1800.784052, 693.451220, 95.995000, X, Y) && !ellipse(27369.231740, 38160.528200, 598.621617, 598.621617, 0.000000, X, Y) && !ellipse(28355.446000, 43965.334000, 2202.360063, 2202.360063, 0.000000, X, Y) && !ellipse(27805.425629, 41796.280396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27429.962200, 40451.080000, 1033.512030, 1033.512030, 0.000000, X, Y) && !ellipse(26962.642000, 43874.474000, 2203.720063, 2203.720063, 0.000000, X, Y)
[Thu Feb 16 22:52:27 2012] Writing fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12.gif
[Thu Feb 16 23:21:20 2012] Mean detx,y = (-187.11, 15915.28) 
[Thu Feb 16 23:21:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 23:22:12 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 23:22:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Feb 16 23:22:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Feb 17 02:58:56 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:56 2012] Error reading totcts from fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Feb 17 02:58:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:57 2012] Using photon index=1.80, rate=0.0667, arf fullrun_mos2_xmm0412591501_pi300-10000_pass1_cl_src12.arf
[Fri Feb 17 02:58:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:57 2012] Updating source flux to 3.5e-12
[Fri Feb 17 03:06:14 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Fri Feb 17 03:06:14 2012] Flag c found in src. 12 procflags, skipping spectral fitting