[Wed Feb 15 10:15:02 2012] Detection parameters:
  Position = (314.2, 395.0) = 5 34 31.57 22 6 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 707.0 +/- 33.2
  Background counts = 189.2
  Rate = 0.08 +/- 0.004

[Wed Feb 15 10:15:05 2012] Off-axis axis estimate = 7.09'
[Wed Feb 15 18:03:46 2012] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 18:03:46 2012] Initial guess for spatial extent in simple fitting = 9.98"
[Wed Feb 15 18:03:46 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.609
[Wed Feb 15 18:03:46 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.98"
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 00:43:48 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Feb 16 00:43:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4.csv
[Thu Feb 16 00:43:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Feb 16 00:43:50 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Feb 16 00:43:50 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Feb 16 00:44:35 2012] Spatial fit model total counts = 3947.360000, observed total counts = 3941.000000
[Thu Feb 16 00:44:35 2012] Offset between fit and detection position for source 11 = 1.867807 pixels
[Thu Feb 16 00:44:35 2012] Warning, changing simple spatial fit ID from 4 to 3
[Thu Feb 16 00:44:35 2012] 3636.950000 total counts/ 3534.940000 bgd. counts: snr = 1.715741
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.867807 pixels
  Position = (312.4, 395.5) = 5 34 32.13 22 6 34.2
  Extent = 6.7 (5.4-8.2)", rotation angle = 0
  Source counts = 102.0 +/- 60.3
  Background counts = 3534.9
  Rate = 0.01 +/- 0.007
[Thu Feb 16 00:44:35 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:35 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:35 2012] Source does appear to be extended
[Thu Feb 16 00:44:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:35 2012] Source is confused with source 10
[Thu Feb 16 09:35:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 09:35:11 2012] Initial guess for spatial extent in simple fitting = 6.75"
[Thu Feb 16 09:35:11 2012] source mask rpix=1.6, npix_max = 16, mask sum = 12, frac = 0.713
[Thu Feb 16 09:35:11 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 6.75"
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Feb 16 19:06:26 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Feb 16 19:06:26 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_src4 appears to have run properly
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Feb 16 19:06:28 2012] fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Feb 16 19:06:28 2012] Fit fullrun_mos2_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Feb 16 19:07:06 2012] Spatial fit model total counts = 4240.920000, observed total counts = 4257.000000
[Thu Feb 16 19:07:06 2012] Offset between fit and detection position for source 11 = 1.749558 pixels
[Thu Feb 16 19:07:06 2012] Warning, changing simple spatial fit ID from 4 to 2
[Thu Feb 16 19:07:06 2012] 4255.362100 total counts/ 4221.730000 bgd. counts: snr = 0.517617
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.749558 pixels
  Position = (313.9, 396.4) = 5 34 31.67 22 6 38.2
  Extent = 3.3 (2.6-4.3)", rotation angle = 0
  Source counts = 33.6 +/- 65.2
  Background counts = 4221.7
  Rate = 0.004 +/- 0.008
  Deleting source due to low Poisson probability