[Wed Feb 15 10:14:10 2012] Detection parameters:
  Position = (409.7, 284.5) = 5 34 1.70 21 58 31.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.1 +/- 23.3
  Background counts = 215.2
  Rate = 0.02 +/- 0.004

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 8.13'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 10.49"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.855
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 91 for pass 0, mean size = 10.49"
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91.ximg exists
[Wed Feb 15 18:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91.csv
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91_1.ximg exists
[Wed Feb 15 18:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91.csv
[Wed Feb 15 18:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:46 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Wed Feb 15 18:03:46 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Wed Feb 15 18:03:46 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 2509.020000, observed total counts = 2500.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 97 = 0.457966 pixels
[Thu Feb 16 00:44:17 2012] 2510.902000 total counts/ 2388.060000 bgd. counts: snr = 2.513763
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.457966 pixels
  Position = (410.2, 284.4) = 5 34 1.56 21 58 30.4
  Extent = 7.3 (5.1-10.5)", rotation angle = 0
  Source counts = 122.8 +/- 50.1
  Background counts = 2388.1
  Rate = 0.01 +/- 0.006
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 27
[Thu Feb 16 00:44:17 2012] Source is confused with source 98
[Thu Feb 16 00:44:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Thu Feb 16 00:44:51 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.048
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 7.32"
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src80.ximg exists
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src80_1.ximg exists
[Thu Feb 16 09:35:09 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src80 appears to have run properly
[Thu Feb 16 09:35:11 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Thu Feb 16 09:35:11 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Thu Feb 16 09:35:11 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Thu Feb 16 19:06:52 2012] Spatial fit model total counts = 2460.850000, observed total counts = 2460.000000
[Thu Feb 16 19:06:52 2012] Offset between fit and detection position for source 97 = 0.287250 pixels
[Thu Feb 16 19:06:52 2012] 2492.382000 total counts/ 2367.770000 bgd. counts: snr = 2.560885
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.287250 pixels
  Position = (409.9, 284.3) = 5 34 1.65 21 58 30.2
  Extent = 7.3 (4.8-10.4)", rotation angle = 0
  Source counts = 124.6 +/- 49.9
  Background counts = 2367.8
  Rate = 0.01 +/- 0.006
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:26 2012] XMMSAS src. selection expression = ellipse(35611.946400, 24685.601800, 439.500013, 439.500013, 0.000000, X, Y)
[Thu Feb 16 19:07:26 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97_src.reg
[Thu Feb 16 19:07:26 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (385, 259) - (435, 310)
[Thu Feb 16 19:07:26 2012] XMMSAS bgd. selection expression = annulus(35611.946400, 24685.601800, 732.500021, 1465.000042, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(34133.029510, 26769.688080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34348.580719, 25970.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34114.189423, 25275.607513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34104.618042, 24755.686401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.472080, 25368.967648, 1773.560051, 222.979576, 90.218609, X, Y) && !ellipse(34827.800232, 26030.987244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33842.776398, 23684.905121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33926.531952, 23282.081421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.520000, 22931.183800, 776.473622, 776.473622, 0.000000, X, Y) && !ellipse(35322.681763, 24565.336731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35348.438202, 22495.632538, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:26 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97.gif
[Thu Feb 16 20:23:19 2012] Mean detx,y = (-2149.29, 8376.83) 
[Thu Feb 16 20:23:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 20:23:35 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 20:23:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Thu Feb 16 20:23:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Fri Feb 17 02:58:54 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:54 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Fri Feb 17 02:58:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:56 2012] Using photon index=1.80, rate=0.0149, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src97.arf
[Fri Feb 17 02:58:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:56 2012] Updating source flux to 2.7e-13
[Fri Feb 17 02:59:01 2012] Flag c found in src. 97 procflags, skipping spectral fitting