[Wed Feb 15 10:14:10 2012] Detection parameters:
  Position = (408.5, 362.1) = 5 34 2.06 22 4 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.6 +/- 21.1
  Background counts = 199.0
  Rate = 0.02 +/- 0.004

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 9.22'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.5, npix_max = 36, mask sum = 25, frac = 0.677
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 11.04"
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87.ximg exists
[Wed Feb 15 18:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87.csv
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87_1.ximg exists
[Wed Feb 15 18:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87.csv
[Wed Feb 15 18:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Wed Feb 15 18:03:45 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Thu Feb 16 00:44:17 2012] Source 93 is offset by 4.287011 and 2.932275 pixels which is larger than
2 X fitted extent = 1.151637 x 1.151637, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Source 93 is offset by -3.512207 and 0.945677 pixels which is larger than
2 X fitted extent = 1.339600 x 1.339600, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 87 centroid is now closest to src. 87
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 21
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 11.04 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 11.04"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.5, npix_max = 36, mask sum = 25, frac = 0.677
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 76 for pass 1, mean size = 11.04"
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76.csv
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76_1.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76.csv
[Thu Feb 16 09:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:11 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Thu Feb 16 09:35:11 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Thu Feb 16 09:35:11 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Thu Feb 16 19:06:52 2012] Source 93 is offset by -3.044736 and 6.690183 pixels which is larger than
2 X fitted extent = 1.443103 x 1.443103, not incorporating fit results
[Thu Feb 16 19:06:52 2012] Source 93 is offset by 5.069931 and 3.018735 pixels which is larger than
2 X fitted extent = 1.902749 x 1.902749, not incorporating fit results
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:26 2012] XMMSAS src. selection expression = ellipse(35491.007965, 31458.145905, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 19:07:26 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93_src.reg
[Thu Feb 16 19:07:26 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (371, 325) - (446, 400)
[Thu Feb 16 19:07:26 2012] XMMSAS bgd. selection expression = annulus(35491.007965, 31458.145905, 1087.500000, 2175.000000, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(31746.500000, 34047.070600, 1685.872049, 1685.872049, 0.000000, X, Y) && !ellipse(35375.161072, 31864.508759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.415131, 30313.289307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34158.308044, 29627.635956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34288.367310, 28663.650574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33191.868400, 34002.691000, 1748.136050, 1748.136050, 0.000000, X, Y) && !ellipse(34534.026550, 31266.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33740.531400, 33800.188000, 541.938416, 541.938416, 0.000000, X, Y) && !ellipse(34433.310669, 31882.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35577.706000, 29572.134000, 911.176026, 911.176026, 0.000000, X, Y) && !ellipse(33036.150000, 34436.726000, 2336.880067, 2336.880067, 0.000000, X, Y) && !ellipse(32583.420000, 34684.090000, 1790.992052, 1790.992052, 0.000000, X, Y) && !ellipse(34750.454000, 34359.576000, 1826.152053, 1826.152053, 0.000000, X, Y) && !ellipse(35519.282000, 34483.568000, 1838.192053, 1838.192053, 0.000000, X, Y) && !ellipse(34419.280000, 33668.922000, 1838.192053, 1838.192053, 0.000000, X, Y) && !ellipse(35271.503418, 33371.715790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35469.895172, 32853.565582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34681.438000, 32986.038000, 1210.792035, 1210.792035, 0.000000, X, Y) && !ellipse(35906.788000, 32250.112000, 883.128025, 883.128025, 0.000000, X, Y) && !ellipse(34789.116000, 31800.708600, 1004.400029, 1004.400029, 0.000000, X, Y) && !ellipse(36196.998840, 31781.902832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34638.342651, 30746.967102, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:26 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93.gif
[Thu Feb 16 20:22:21 2012] Mean detx,y = (4601.23, 7887.89) 
[Thu Feb 16 20:22:22 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 20:22:37 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 20:22:38 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Thu Feb 16 20:22:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Thu Feb 16 22:48:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 22:48:03 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:54 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:54 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Fri Feb 17 02:58:56 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:56 2012] Using photon index=1.80, rate=0.0206, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src93.arf
[Fri Feb 17 02:58:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:56 2012] Updating source flux to 3.6e-13
[Fri Feb 17 02:59:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting