[Wed Feb 15 10:14:10 2012] Detection parameters:
  Position = (415.4, 382.7) = 5 33 59.89 22 5 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.7 +/- 19.9
  Background counts = 150.3
  Rate = 0.02 +/- 0.004

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 10.45'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 11.65"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.039
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 11.65"
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80.csv
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80.csv
[Wed Feb 15 18:03:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Feb 15 18:03:45 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 2301.100000, observed total counts = 2296.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 86 = 1.369004 pixels
[Thu Feb 16 00:44:17 2012] Warning, changing simple spatial fit ID from 80 to 78
[Thu Feb 16 00:44:17 2012] 2228.140060 total counts/ 2221.710000 bgd. counts: snr = 0.136418
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 1.369004 pixels
  Position = (416.5, 383.5) = 5 33 59.55 22 5 41.9
  Extent = 2.9 (2.9-4.1)", rotation angle = 0
  Source counts = 6.4 +/- 47.2
  Background counts = 2221.7
  Rate = 0.0008 +/- 0.006
  Deleting source due to low Poisson probability