[Wed Feb 15 10:14:09 2012] Detection parameters:
  Position = (242.6, 400.9) = 5 34 53.97 22 6 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.7 +/- 18.8
  Background counts = 139.1
  Rate = 0.02 +/- 0.002

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 8.46'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 10.66 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 10.66"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.5, npix_max = 34, mask sum = 29, frac = 0.833
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 10.66"
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67.csv
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67_1.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67.csv
[Wed Feb 15 18:03:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Wed Feb 15 18:03:45 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 1313.940000, observed total counts = 1314.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 73 = 5.587244 pixels
[Thu Feb 16 00:44:17 2012] 1292.194000 total counts/ 688.109000 bgd. counts: snr = 23.028701
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 5.587244 pixels
  Position = (248.1, 402.2) = 5 34 52.26 22 7 3.2
  Extent = 21.3 (21.3-21.3)", rotation angle = 0
  Source counts = 604.1 +/- 35.9
  Background counts = 688.1
  Rate = 0.07 +/- 0.004
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 21.31"
[Thu Feb 16 00:44:51 2012] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.944
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 21.31"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 60 centroid is now closest to src. 3
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:25 2012] XMMSAS src. selection expression = ellipse(21534.092000, 34942.106620, 1278.498037, 1278.498037, 0.000000, X, Y)
[Thu Feb 16 19:07:25 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73_src.reg
[Thu Feb 16 19:07:25 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (175, 329) - (322, 476)
[Thu Feb 16 19:07:25 2012] XMMSAS bgd. selection expression = annulus(21534.092000, 34942.106620, 2130.830061, 4261.660123, X, Y) && !ellipse(20785.455154, 32626.839355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(20696.466537, 31485.025421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.964000, 34221.529600, 1590.000046, 1590.000046, 0.000000, X, Y) && !ellipse(27351.854400, 35831.648000, 1730.072050, 1730.072050, 0.000000, X, Y) && !ellipse(26978.712000, 34474.684000, 1622.648047, 1622.648047, 0.000000, X, Y) && !ellipse(23661.438000, 34450.877800, 1630.240047, 1630.240047, 0.000000, X, Y) && !ellipse(25628.714800, 34525.607400, 2028.880058, 2028.880058, 0.000000, X, Y)
[Thu Feb 16 19:07:25 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73.gif
[Thu Feb 16 20:04:27 2012] Mean detx,y = (7530.91, -6071.90) 
[Thu Feb 16 20:04:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 20:04:54 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 20:04:55 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Thu Feb 16 20:04:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Fri Feb 17 02:58:54 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:54 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0724, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src73.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 1.4e-12