[Wed Feb 15 10:14:09 2012] Detection parameters: Position = (298.5, 399.5) = 5 34 36.47 22 6 55.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 103.8 +/- 23.2 Background counts = 271.4 Rate = 0.02 +/- 0.004 [Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 7.33' [Wed Feb 15 10:17:40 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting [Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 10.09" [Wed Feb 15 10:17:40 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.786 [Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 66 for pass 0, mean size = 10.09" [Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66.ximg exists [Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66.csv [Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66_1.ximg exists [Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66.csv [Wed Feb 15 18:03:42 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66.ximg exists [Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists [Wed Feb 15 18:03:45 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly [Thu Feb 16 00:44:17 2012] Warning, spatial fit 66 centroid is now closest to src. 79 [Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 2281.360000, observed total counts = 2419.000000 [Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 72 = 4.152877 pixels [Thu Feb 16 00:44:17 2012] Warning, changing simple spatial fit ID from 66 to 73 Spatial fit parameters: Offset between fit and detection position for source 72 = 4.152877 pixels Position = (297.3, 395.5) = 5 34 36.84 22 6 34.2 Extent = 19.9 (19.8-39.8)", rotation angle = 0 Source counts = 2032.8 +/- 45.1 Background counts = 0.0 Rate = 0.2 +/- 0.005 Deleting source due to low signal-to-noise ratio