[Wed Feb 15 10:14:07 2012] Detection parameters:
  Position = (392.9, 308.3) = 5 34 6.95 22 0 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 502.5 +/- 30.1
  Background counts = 212.0
  Rate = 0.1 +/- 0.006

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 6.88'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.87"
[Wed Feb 15 18:03:40 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Feb 15 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3.csv
[Wed Feb 15 18:03:40 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Feb 15 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3.csv
[Wed Feb 15 18:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 15 18:03:43 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 15 18:03:43 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 3 centroid is now closest to src. 13
[Thu Feb 16 00:44:17 2012] Source 7 is offset by -3.308672 and 3.318024 pixels which is larger than
2 X fitted extent = 2.548189 x 2.548189, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.87"
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Feb 16 09:35:07 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Feb 16 09:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:22 2012] XMMSAS src. selection expression = ellipse(34133.029510, 26769.688080, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 19:07:22 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7_src.reg
[Thu Feb 16 19:07:22 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (355, 271) - (430, 346)
[Thu Feb 16 19:07:22 2012] XMMSAS bgd. selection expression = annulus(34133.029510, 26769.688080, 1087.500000, 2175.000000, X, Y) && !ellipse(35061.373779, 28330.978058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.674561, 27484.249390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(34348.580719, 25970.983582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34114.189423, 25275.607513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34104.618042, 24755.686401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34158.308044, 29627.635956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34288.367310, 28663.650574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34263.651642, 28053.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34842.032000, 26775.032000, 607.252817, 607.252817, 0.000000, X, Y) && !ellipse(34839.472080, 25368.967648, 1773.560051, 222.979576, 90.218609, X, Y) && !ellipse(34827.800232, 26030.987244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35577.706000, 29572.134000, 911.176026, 911.176026, 0.000000, X, Y) && !ellipse(35611.946400, 24685.601800, 586.000017, 586.000017, 0.000000, X, Y) && !ellipse(35322.681763, 24565.336731, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:22 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7.gif
[Thu Feb 16 19:12:34 2012] Mean detx,y = (-159.52, 6931.08) 
[Thu Feb 16 19:12:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:12:57 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:12:57 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Feb 16 19:12:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Feb 16 20:37:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 20:37:53 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Feb 17 02:58:54 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:54 2012] Using photon index=1.80, rate=0.1, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src7.arf
[Fri Feb 17 02:58:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:54 2012] Updating source flux to 1.9e-12
[Fri Feb 17 02:59:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting