[Wed Feb 15 10:14:09 2012] Detection parameters:
  Position = (318.7, 447.0) = 5 34 30.16 22 10 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.2 +/- 21.7
  Background counts = 126.0
  Rate = 0.01 +/- 0.003

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 10.87'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.86"
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53.csv
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53.csv
[Wed Feb 15 18:03:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Feb 15 18:03:45 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Feb 15 18:03:45 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Thu Feb 16 00:44:17 2012] Source 59 is offset by 3.577186 and -3.094048 pixels which is larger than
2 X fitted extent = 1.426561 x 1.426561, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 10.773654 pixels away
[Thu Feb 16 00:44:17 2012] Source 59 is offset by 3.974933 and 1.567055 pixels which is larger than
2 X fitted extent = 1.310933 x 1.310933, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 32
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 11.86 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 11.86"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.008
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.86"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Thu Feb 16 19:06:52 2012] Source 59 is offset by 9.379669 and 1.708435 pixels which is larger than
2 X fitted extent = 1.401871 x 1.401871, not incorporating fit results
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 48 centroid is now closest to src. 16
[Thu Feb 16 19:06:52 2012] Spatial fit model total counts = 2663.960000, observed total counts = 2663.000000
[Thu Feb 16 19:06:52 2012] Offset between fit and detection position for source 59 = 5.049426 pixels
[Thu Feb 16 19:06:52 2012] Warning, changing simple spatial fit ID from 48 to 49
[Thu Feb 16 19:06:52 2012] 2484.882000 total counts/ 1854.690000 bgd. counts: snr = 14.633130
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 5.049426 pixels
  Position = (319.3, 442.0) = 5 34 29.96 22 9 56.3
  Extent = 23.1 (22.1-46.3)", rotation angle = 0
  Source counts = 630.2 +/- 49.8
  Background counts = 1854.7
  Rate = 0.08 +/- 0.006
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:24 2012] XMMSAS src. selection expression = ellipse(27732.654000, 38404.388000, 1388.166040, 1388.166040, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59_src.reg
[Thu Feb 16 19:07:24 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (240, 362) - (399, 522)
[Thu Feb 16 19:07:24 2012] XMMSAS bgd. selection expression = annulus(27732.654000, 38404.388000, 2313.610067, 4627.220133, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(27242.471325, 34177.381430, 1217.441068, 1156.145527, 90.000000, X, Y) && !ellipse(29579.678000, 34597.686000, 1242.440036, 1242.440036, 0.000000, X, Y) && !ellipse(30151.622000, 34148.246200, 1636.760047, 1636.760047, 0.000000, X, Y) && !ellipse(28313.246200, 39645.674000, 1985.776057, 1985.776057, 0.000000, X, Y) && !ellipse(27970.499420, 40841.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27885.732300, 40321.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28570.214783, 34263.789703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.631622, 34136.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30405.168000, 34338.232000, 1524.240044, 1524.240044, 0.000000, X, Y) && !ellipse(31746.500000, 34047.070600, 1685.872049, 1685.872049, 0.000000, X, Y) && !ellipse(27915.816437, 41625.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.026031, 40053.211182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27608.540400, 38507.269200, 822.192024, 822.192024, 0.000000, X, Y) && !ellipse(27926.686000, 34490.808000, 1713.872049, 1713.872049, 0.000000, X, Y) && !ellipse(33191.868400, 34002.691000, 1748.136050, 1748.136050, 0.000000, X, Y) && !ellipse(32085.967407, 34007.303253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28006.334960, 42366.849600, 881.760025, 881.760025, 0.000000, X, Y) && !ellipse(27909.780460, 41218.106000, 2033.040059, 2033.040059, 0.000000, X, Y) && !ellipse(28787.066956, 34978.204987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.964000, 34221.529600, 1590.000046, 1590.000046, 0.000000, X, Y) && !ellipse(28115.764038, 43183.928802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28465.317230, 40835.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28057.374634, 38062.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.093903, 37706.051117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.050751, 36839.107056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.090515, 36310.437622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.516600, 35547.764000, 1723.712050, 1723.712050, 0.000000, X, Y) && !ellipse(27351.854400, 35831.648000, 1730.072050, 1730.072050, 0.000000, X, Y) && !ellipse(27917.466000, 35179.393800, 1661.616048, 1661.616048, 0.000000, X, Y) && !ellipse(32249.509247, 35193.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33036.150000, 34436.726000, 2336.880067, 2336.880067, 0.000000, X, Y) && !ellipse(21534.092000, 34942.106620, 1704.664049, 1704.664049, 0.000000, X, Y) && !ellipse(30492.080200, 34891.885000, 821.456024, 821.456024, 0.000000, X, Y) && !ellipse(26978.712000, 34474.684000, 1622.648047, 1622.648047, 0.000000, X, Y) && !ellipse(32583.420000, 34684.090000, 1790.992052, 1790.992052, 0.000000, X, Y) && !ellipse(23661.438000, 34450.877800, 1630.240047, 1630.240047, 0.000000, X, Y) && !ellipse(25628.714800, 34525.607400, 2028.880058, 2028.880058, 0.000000, X, Y) && !ellipse(27967.624023, 43719.201294, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59.gif
[Thu Feb 16 19:47:21 2012] Mean detx,y = (11079.38, -152.56) 
[Thu Feb 16 19:47:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:47:41 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:47:41 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Feb 16 19:47:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0755, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src59.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 1.4e-12
[Fri Feb 17 02:59:01 2012] Flag b found in src. 59 procflags, skipping spectral fitting
[Fri Feb 17 02:59:01 2012] Flag c found in src. 59 procflags, skipping spectral fitting