[Wed Feb 15 10:14:09 2012] Detection parameters:
  Position = (390.6, 264.1) = 5 34 7.68 21 56 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.4 +/- 23.2
  Background counts = 157.3
  Rate = 0.04 +/- 0.005

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 7.13'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.3, npix_max = 31, mask sum = 24, frac = 0.767
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 9.99"
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49.csv
[Wed Feb 15 18:03:42 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49_1.ximg exists
[Wed Feb 15 18:03:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49.csv
[Wed Feb 15 18:03:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Wed Feb 15 18:03:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Feb 15 18:03:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49.csv
[Wed Feb 15 18:03:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 2715.520000, observed total counts = 2710.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 55 = 0.973573 pixels
[Thu Feb 16 00:44:17 2012] Warning, changing simple spatial fit ID from 49 to 37
[Thu Feb 16 00:44:17 2012] 2670.279000 total counts/ 2557.810000 bgd. counts: snr = 2.223815
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.973573 pixels
  Position = (391.6, 264.1) = 5 34 7.38 21 57 2.5
  Extent = 9.7 (2.6-20.6)", rotation angle = 0
  Source counts = 112.5 +/- 51.7
  Background counts = 2557.8
  Rate = 0.01 +/- 0.006
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 54
[Thu Feb 16 00:44:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.804
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 9.71"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 44 centroid is now closest to src. 28
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:24 2012] XMMSAS src. selection expression = ellipse(34018.520000, 22931.183800, 582.355217, 582.355217, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55_src.reg
[Thu Feb 16 19:07:24 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (358, 231) - (425, 298)
[Thu Feb 16 19:07:24 2012] XMMSAS bgd. selection expression = annulus(34018.520000, 22931.183800, 970.592028, 1941.184056, X, Y) && !ellipse(34114.189423, 25275.607513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34104.618042, 24755.686401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34839.472080, 25368.967648, 1773.560051, 222.979576, 90.218609, X, Y) && !ellipse(33842.776398, 23684.905121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33762.652924, 20921.088654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33926.531952, 23282.081421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34687.686371, 21316.922989, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35611.946400, 24685.601800, 586.000017, 586.000017, 0.000000, X, Y) && !ellipse(35322.681763, 24565.336731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35348.438202, 22495.632538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34005.829712, 22305.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33941.009827, 21956.377502, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55.gif
[Thu Feb 16 19:46:25 2012] Mean detx,y = (-3961.49, 6954.35) 
[Thu Feb 16 19:46:25 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:46:35 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:46:35 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Feb 16 19:46:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0135, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src55.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 2.3e-13
[Fri Feb 17 02:59:01 2012] Flag c found in src. 55 procflags, skipping spectral fitting