[Wed Feb 15 10:14:08 2012] Detection parameters:
  Position = (386.1, 393.2) = 5 34 9.06 22 6 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.8 +/- 24.2
  Background counts = 139.7
  Rate = 0.04 +/- 0.006

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 9.36'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.858
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 11.11"
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43.csv
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43.csv
[Wed Feb 15 18:03:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Feb 15 18:03:44 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 43 centroid is now closest to src. 49
[Thu Feb 16 00:44:17 2012] Source 48 is offset by -4.560670 and -4.413049 pixels which is larger than
2 X fitted extent = 1.349191 x 1.349191, not incorporating fit results
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 1883.950000, observed total counts = 1896.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 48 = 2.125935 pixels
[Thu Feb 16 00:44:17 2012] Warning, changing simple spatial fit ID from 43 to 77
[Thu Feb 16 00:44:17 2012] 1961.919000 total counts/ 1838.600000 bgd. counts: snr = 2.875983
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.125935 pixels
  Position = (387.7, 391.7) = 5 34 8.57 22 6 17.6
  Extent = 8.8 (7.9-9.6)", rotation angle = 0
  Source counts = 123.3 +/- 44.3
  Background counts = 1838.6
  Rate = 0.01 +/- 0.005
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 36
[Thu Feb 16 00:44:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 8.76"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.831
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 8.76"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Feb 16 19:06:52 2012] Spatial fit model total counts = 1784.600000, observed total counts = 1816.000000
[Thu Feb 16 19:06:52 2012] Offset between fit and detection position for source 48 = 2.773570 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.773570 pixels
  Position = (388.4, 389.1) = 5 34 8.35 22 6 6.0
  Extent = 6.8 (6.0-7.5)", rotation angle = 0
  Source counts = 118.2 +/- 10.9
  Background counts = 0.0
  Rate = 0.01 +/- 0.001
[Thu Feb 16 19:06:52 2012] Source 48 is offset by 1.485832 and 0.959218 pixels which is larger than
2 X fitted extent = 1.263274 x 1.263274, not incorporating fit results
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:24 2012] XMMSAS src. selection expression = ellipse(33740.531400, 33800.188000, 406.453812, 406.453812, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48_src.reg
[Thu Feb 16 19:07:24 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (365, 366) - (412, 412)
[Thu Feb 16 19:07:24 2012] XMMSAS bgd. selection expression = annulus(33740.531400, 33800.188000, 677.423019, 1354.846039, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(31746.500000, 34047.070600, 1685.872049, 1685.872049, 0.000000, X, Y) && !ellipse(35375.161072, 31864.508759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33191.868400, 34002.691000, 1748.136050, 1748.136050, 0.000000, X, Y) && !ellipse(32085.967407, 34007.303253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34433.310669, 31882.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32249.509247, 35193.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33036.150000, 34436.726000, 2336.880067, 2336.880067, 0.000000, X, Y) && !ellipse(34745.515800, 35483.508000, 1443.136042, 1443.136042, 0.000000, X, Y) && !ellipse(32583.420000, 34684.090000, 1790.992052, 1790.992052, 0.000000, X, Y) && !ellipse(34750.454000, 34359.576000, 1826.152053, 1826.152053, 0.000000, X, Y) && !ellipse(35519.282000, 34483.568000, 1838.192053, 1838.192053, 0.000000, X, Y) && !ellipse(34419.280000, 33668.922000, 1838.192053, 1838.192053, 0.000000, X, Y) && !ellipse(35271.503418, 33371.715790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35469.895172, 32853.565582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34681.438000, 32986.038000, 1210.792035, 1210.792035, 0.000000, X, Y) && !ellipse(35906.788000, 32250.112000, 883.128025, 883.128025, 0.000000, X, Y) && !ellipse(34789.116000, 31800.708600, 1004.400029, 1004.400029, 0.000000, X, Y)
[Thu Feb 16 19:07:24 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48.gif
[Thu Feb 16 19:44:00 2012] Mean detx,y = (6960.03, 5965.05) 
[Thu Feb 16 19:44:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:44:17 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:44:17 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Thu Feb 16 19:44:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0142, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src48.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 4.6e-13
[Fri Feb 17 02:59:01 2012] Flag b found in src. 48 procflags, skipping spectral fitting
[Fri Feb 17 02:59:01 2012] Flag c found in src. 48 procflags, skipping spectral fitting