[Wed Feb 15 10:14:08 2012] Detection parameters:
  Position = (318.1, 474.9) = 5 34 30.35 22 12 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.4 +/- 20.4
  Background counts = 76.2
  Rate = 0.02 +/- 0.002

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 12.87'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Wed Feb 15 10:17:40 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.87"
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39.csv
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39.csv
[Wed Feb 15 18:03:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Feb 15 18:03:44 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Thu Feb 16 00:44:17 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 11.363218 pixels away
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 39 centroid is now closest to src. 16
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 15
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 12.87 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 12.87"
[Thu Feb 16 00:44:51 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 12.87"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Feb 16 19:06:52 2012] Spatial fit model total counts = 2093.850000, observed total counts = 2093.000000
[Thu Feb 16 19:06:52 2012] Offset between fit and detection position for source 44 = 3.353483 pixels
[Thu Feb 16 19:06:52 2012] Warning, changing simple spatial fit ID from 35 to 10
[Thu Feb 16 19:06:52 2012] 1930.471000 total counts/ 1277.270000 bgd. counts: snr = 18.277024
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.353483 pixels
  Position = (321.4, 474.3) = 5 34 29.32 22 12 17.0
  Extent = 25.4 (20.6-50.8)", rotation angle = 0
  Source counts = 653.2 +/- 43.9
  Background counts = 1277.3
  Rate = 0.08 +/- 0.005
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:23 2012] XMMSAS src. selection expression = ellipse(27909.780460, 41218.106000, 1524.780044, 1524.780044, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44_src.reg
[Thu Feb 16 19:07:23 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (234, 387) - (409, 562)
[Thu Feb 16 19:07:23 2012] XMMSAS bgd. selection expression = annulus(27909.780460, 41218.106000, 2541.300073, 5082.600146, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(28313.246200, 39645.674000, 1985.776057, 1985.776057, 0.000000, X, Y) && !ellipse(27970.499420, 40841.696472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27885.732300, 40321.106293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27915.816437, 41625.073486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.026031, 40053.211182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27608.540400, 38507.269200, 822.192024, 822.192024, 0.000000, X, Y) && !ellipse(27926.686000, 34490.808000, 1713.872049, 1713.872049, 0.000000, X, Y) && !ellipse(28006.334960, 42366.849600, 881.760025, 881.760025, 0.000000, X, Y) && !ellipse(28115.764038, 43183.928802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28465.317230, 40835.481049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27732.654000, 38404.388000, 1850.888053, 1850.888053, 0.000000, X, Y) && !ellipse(28057.374634, 38062.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.093903, 37706.051117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.050751, 36839.107056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.090515, 36310.437622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.516600, 35547.764000, 1723.712050, 1723.712050, 0.000000, X, Y) && !ellipse(27351.854400, 35831.648000, 1730.072050, 1730.072050, 0.000000, X, Y) && !ellipse(27917.466000, 35179.393800, 1661.616048, 1661.616048, 0.000000, X, Y) && !ellipse(33036.150000, 34436.726000, 2336.880067, 2336.880067, 0.000000, X, Y) && !ellipse(21534.092000, 34942.106620, 1704.664049, 1704.664049, 0.000000, X, Y) && !ellipse(32583.420000, 34684.090000, 1790.992052, 1790.992052, 0.000000, X, Y) && !ellipse(25628.714800, 34525.607400, 2028.880058, 2028.880058, 0.000000, X, Y) && !ellipse(34750.454000, 34359.576000, 1826.152053, 1826.152053, 0.000000, X, Y) && !ellipse(27967.624023, 43719.201294, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44.gif
[Thu Feb 16 19:38:56 2012] Mean detx,y = (13882.43, -112.31) 
[Thu Feb 16 19:38:56 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:39:32 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:39:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Thu Feb 16 19:39:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0782, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src44.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 1.8e-12
[Fri Feb 17 02:59:01 2012] Flag c found in src. 44 procflags, skipping spectral fitting