[Wed Feb 15 10:14:08 2012] Detection parameters:
  Position = (323.2, 404.8) = 5 34 28.74 22 7 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 264.1 +/- 32.4
  Background counts = 323.4
  Rate = 0.05 +/- 0.006

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 7.92'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.079
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 10.39"
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29.csv
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29_1.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29.csv
[Wed Feb 15 18:03:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Wed Feb 15 18:03:44 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Feb 16 00:44:17 2012] Spatial fit model total counts = 4956.710000, observed total counts = 4952.000000
[Thu Feb 16 00:44:17 2012] Offset between fit and detection position for source 34 = 7.583863 pixels
[Thu Feb 16 00:44:17 2012] 4899.289000 total counts/ 4314.880000 bgd. counts: snr = 8.896774
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 7.583863 pixels
  Position = (319.9, 398.0) = 5 34 29.77 22 6 45.0
  Extent = 20.6 (20.3-20.8)", rotation angle = 0
  Source counts = 584.4 +/- 70.0
  Background counts = 4314.9
  Rate = 0.07 +/- 0.008
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:17 2012] Source is confused with source 4
[Thu Feb 16 00:44:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 20.63"
[Thu Feb 16 00:44:51 2012] source mask rpix=4.7, npix_max = 109, mask sum = 100, frac = 0.909
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 20.63"
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27.csv
[Thu Feb 16 09:35:08 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Feb 16 09:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27.csv
[Thu Feb 16 09:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Feb 16 09:35:10 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Feb 16 09:35:10 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 27 centroid is now closest to src. 4
[Thu Feb 16 19:06:52 2012] Spatial fit model total counts = 14271.800000, observed total counts = 14252.000000
[Thu Feb 16 19:06:52 2012] Offset between fit and detection position for source 34 = 1.906000 pixels
[Thu Feb 16 19:06:52 2012] Warning, changing simple spatial fit ID from 27 to 53
[Thu Feb 16 19:06:52 2012] 13663.411000 total counts/ 12750.100000 bgd. counts: snr = 8.088386
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 1.906000 pixels
  Position = (321.6, 397.0) = 5 34 29.26 22 6 40.7
  Extent = 21.4 (18.6-24.6)", rotation angle = 0
  Source counts = 913.3 +/- 116.9
  Background counts = 12750.1
  Rate = 0.1 +/- 0.01
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:23 2012] XMMSAS src. selection expression = ellipse(27926.686000, 34490.808000, 1285.404037, 1285.404037, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34_src.reg
[Thu Feb 16 19:07:23 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (248, 323) - (395, 471)
[Thu Feb 16 19:07:23 2012] XMMSAS bgd. selection expression = annulus(27926.686000, 34490.808000, 2142.340062, 4284.680123, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(27242.471325, 34177.381430, 1217.441068, 1156.145527, 90.000000, X, Y) && !ellipse(29579.678000, 34597.686000, 1242.440036, 1242.440036, 0.000000, X, Y) && !ellipse(30151.622000, 34148.246200, 1636.760047, 1636.760047, 0.000000, X, Y) && !ellipse(28313.246200, 39645.674000, 1985.776057, 1985.776057, 0.000000, X, Y) && !ellipse(28570.214783, 34263.789703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29179.631622, 34136.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30405.168000, 34338.232000, 1524.240044, 1524.240044, 0.000000, X, Y) && !ellipse(31746.500000, 34047.070600, 1685.872049, 1685.872049, 0.000000, X, Y) && !ellipse(27608.540400, 38507.269200, 822.192024, 822.192024, 0.000000, X, Y) && !ellipse(33191.868400, 34002.691000, 1748.136050, 1748.136050, 0.000000, X, Y) && !ellipse(32085.967407, 34007.303253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28787.066956, 34978.204987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.964000, 34221.529600, 1590.000046, 1590.000046, 0.000000, X, Y) && !ellipse(27732.654000, 38404.388000, 1850.888053, 1850.888053, 0.000000, X, Y) && !ellipse(28057.374634, 38062.852539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.093903, 37706.051117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27869.050751, 36839.107056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27549.090515, 36310.437622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.516600, 35547.764000, 1723.712050, 1723.712050, 0.000000, X, Y) && !ellipse(27351.854400, 35831.648000, 1730.072050, 1730.072050, 0.000000, X, Y) && !ellipse(27917.466000, 35179.393800, 1661.616048, 1661.616048, 0.000000, X, Y) && !ellipse(32249.509247, 35193.291565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33036.150000, 34436.726000, 2336.880067, 2336.880067, 0.000000, X, Y) && !ellipse(30492.080200, 34891.885000, 821.456024, 821.456024, 0.000000, X, Y) && !ellipse(26978.712000, 34474.684000, 1622.648047, 1622.648047, 0.000000, X, Y) && !ellipse(32583.420000, 34684.090000, 1790.992052, 1790.992052, 0.000000, X, Y) && !ellipse(23661.438000, 34450.877800, 1630.240047, 1630.240047, 0.000000, X, Y) && !ellipse(25628.714800, 34525.607400, 2028.880058, 2028.880058, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34.gif
[Thu Feb 16 19:31:19 2012] Mean detx,y = (7449.41, 168.27) 
[Thu Feb 16 19:31:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:31:36 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:31:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Thu Feb 16 19:31:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.109, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src34.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 1.6e-12
[Fri Feb 17 02:59:01 2012] Flag c found in src. 34 procflags, skipping spectral fitting