[Wed Feb 15 10:14:07 2012] Detection parameters:
  Position = (393.2, 341.1) = 5 34 6.86 22 2 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 328.2 +/- 29.0
  Background counts = 244.2
  Rate = 0.06 +/- 0.005

[Wed Feb 15 10:14:10 2012] Off-axis axis estimate = 7.53'
[Wed Feb 15 10:17:40 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:17:40 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Wed Feb 15 10:17:40 2012] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.556
[Wed Feb 15 10:17:40 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.20"
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18.csv
[Wed Feb 15 18:03:41 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Feb 15 18:03:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18.csv
[Wed Feb 15 18:03:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Feb 15 18:03:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Feb 15 18:03:44 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Feb 15 18:03:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Feb 15 18:03:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 00:44:17 2012] Warning, spatial fit 18 centroid is now closest to src. 22
[Thu Feb 16 00:44:17 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 10.138995 pixels away
[Thu Feb 16 00:44:17 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 00:44:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 00:44:17 2012] Assessing source extent using major
[Thu Feb 16 00:44:17 2012] Source does appear to be extended
[Thu Feb 16 00:44:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 00:44:51 2012] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 00:44:51 2012] Initial guess for spatial extent in simple fitting = 10.20"
[Thu Feb 16 00:44:51 2012] source mask rpix=2.3, npix_max = 32, mask sum = 18, frac = 0.556
[Thu Feb 16 00:44:51 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 10.20"
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src18.ximg exists
[Thu Feb 16 09:35:07 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu Feb 16 09:35:07 2012] Fit fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_src18 appears to have run properly
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Feb 16 09:35:09 2012] fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu Feb 16 09:35:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18.csv
[Thu Feb 16 09:35:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412591501_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 19:06:52 2012] Warning, spatial fit 18 centroid is now closest to src. 94
[Thu Feb 16 19:06:52 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 19:06:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 19:06:52 2012] Assessing source extent using major
[Thu Feb 16 19:06:52 2012] Source does appear to be extended
[Thu Feb 16 19:06:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:07:23 2012] XMMSAS src. selection expression = ellipse(34158.308044, 29627.635956, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing source region out to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23_src.reg
[Thu Feb 16 19:07:23 2012] Extracting stamp from image fullrun_mos1_xmm0412591501_pi300-10000_cl_sm2.00.img.gz, (356, 304) - (431, 379)
[Thu Feb 16 19:07:23 2012] XMMSAS bgd. selection expression = annulus(34158.308044, 29627.635956, 1087.500000, 2175.000000, X, Y) && !ellipse(35061.373779, 28330.978058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35059.674561, 27484.249390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28258.814000, 34447.251000, 9264.936267, 9264.936267, 0.000000, X, Y) && !ellipse(34133.029510, 26769.688080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35375.161072, 31864.508759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34361.415131, 30313.289307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34288.367310, 28663.650574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34263.651642, 28053.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34534.026550, 31266.673157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34433.310669, 31882.480652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35577.706000, 29572.134000, 911.176026, 911.176026, 0.000000, X, Y) && !ellipse(34681.438000, 32986.038000, 1210.792035, 1210.792035, 0.000000, X, Y) && !ellipse(35906.788000, 32250.112000, 883.128025, 883.128025, 0.000000, X, Y) && !ellipse(34789.116000, 31800.708600, 1004.400029, 1004.400029, 0.000000, X, Y) && !ellipse(36196.998840, 31781.902832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35491.007965, 31458.145905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34638.342651, 30746.967102, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Feb 16 19:07:23 2012] Writing fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23.gif
[Thu Feb 16 19:28:10 2012] Mean detx,y = (2701.75, 6852.30) 
[Thu Feb 16 19:28:11 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Feb 16 19:28:32 2012] Binned source spectrum to 10 counts/bin
[Thu Feb 16 19:28:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Feb 16 19:28:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Feb 16 20:59:14 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Feb 16 20:59:14 2012] rmf not generated due to insufficient counts
[Fri Feb 17 02:58:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 02:58:53 2012] Error reading totcts from fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Feb 17 02:58:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 02:58:55 2012] Using photon index=1.80, rate=0.0603, arf fullrun_mos1_xmm0412591501_pi300-10000_pass1_cl_src23.arf
[Fri Feb 17 02:58:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Feb 17 02:58:55 2012] Updating source flux to 1.1e-12
[Fri Feb 17 02:59:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting